● Crystal oscillator (Programmable)
● Output frequency:
0.67 MHz to 170 MHz (1 × 10
-6
Step)
● Supply voltage:
1.62 V to 3.63 V
● Frequency tolerance, Operating temperature:
±15 × 10
-6
/ -40 °C to +85 °C
±20 × 10
-6
, ±50 × 10
-6
/ -40 °C to +105 °C
Epson’s SG-8101 series are Programmable Crystal Oscillator series with CMOS output.
While this series offer the same easy programmability of frequencies and other parameters as comparable earlier
SG-8002/SG-8003 series, they also have a wider operating temperature range, with a top-end limit of 105 °C.
In addition to a 2.5 × 2.0 mm package that will enable electronics manufacturers to save board space, the
oscillators will also be available in the following popular package sizes: 3.2 × 2.5 mm, 5.0 × 3.2 mm and
7.0 × 5.0 mm. The oscillator in the SG-8101 series have an approximately 66 % tighter frequency tolerance and
50 % lower current consumption than comparable products, and can be used under a wide range of
environmental conditions. This will also significantly contribute to performance, lower power requirements, fast
development cycles, and low-volume production.
Outline Drawing and Terminal Assignment
SG-8101CG
* Please do not use the OE/S̅ T̅ terminal in the open state.
Programmable Crystal Oscillator: SG-8101CG/SG-8101CE/SG-8101CB/SG-8101CA
OE function Osc. Circuit Output
“H” * Oscillation Specified frequency: Enable
“L” Oscillation Low (weak pull down): Disable
S̅ T̅ function Osc. Circuit Output
“H” * Oscillation Specified frequency: Enable
“L” Oscillation stop Low (weak pull down): Disable
SG-8101CG SG-8101CE SG-8101CB SG-8101CA
Page 1 / 39 Spec No : SG-8101series_E_Ver1.01