Features
● Crystal oscillator (Programmable)
● Output frequency:
0.67 MHz to 170 MHz (1 × 10
-6
Step)
● Output:
CMOS
● Supply voltage:
1.62 V to 3.63 V
● Frequency tolerance, Operating temperature:
±50 × 10
-6
/ -40 °C to +105 °C
* Including frequency aging (+25 °C, 10 years)
Description
Epson’s SG-8018 series are Programmable Crystal Oscillator series with CMOS output.
While this series offer the same easy programmability of frequencies and other parameters as comparable earlier
SG-8002/SG-8003 series, they also have a wider operating temperature range, with a top-end limit of 105 °C.
In addition to a 2.5 × 2.0 mm package that will enable electronics manufacturers to save board space, the
oscillators will also be available in the following popular package sizes: 3.2 × 2.5 mm, 5.0 × 3.2 mm and
7.0 × 5.0 mm. The oscillator in the SG-8018 series have an approximately 66 % tighter frequency tolerance and
50 % lower current consumption than comparable products, and can be used under a wide range of
environmental conditions. This will also significantly contribute to performance, lower power requirements, fast
development cycles, and low-volume production.
Outline Drawing and Terminal Assignment
SG-8018CG
SG-8018CE
SG-8018CB
SG-8018CA
Terminal Assignment
* Please do not use the OE/S̅ T̅ terminal in the open state.
Programmable Crystal Oscillator: SG-8018CG/SG-8018CE/SG-8018CB/SG-8018CA
Pin # Connection
OE function Osc. Circuit Output
“H” * Oscillation Specified frequency: Enable
“L” Oscillation Low (weak pull down): Disable
S̅ T̅ function Osc. Circuit Output
“H” * Oscillation Specified frequency: Enable
“L” Oscillation stop Low (weak pull down): Disable
#2 GND
#3 OUT
#4
V
CC
GND terminal
Output terminal
V
CC
terminal
Function
#1
OE
OE terminal
S̅ T̅
S̅ T̅ terminal
SG-8018CG SG-8018CE SG-8018CB SG-8018CA
Page 1 / 40 Spec No : SG-8018series_E_Ver1.01
[ 1 ] Product Name / Product Number
(1-1) Product Name (Standard Form)
SG-8018CG: X1G005601xxxx00
SG-8018CE: X1G005591xxxx00
SG-8018CB: X1G005581xxxx00
SG-8018CA: X1G005571xxxx00
(Please contact Epson for details)
(1-2) Product Number / Ordering Code
①Model ②Size ③Frequency ④Supply voltage (T: 1.8 V to 3.3 V Typ.)
⑤Frequency tolerance / ⑥Operating temperature (JH: ±50 × 10
-6
/ -40 °C to +105 °C)
⑦Function ⑧Rise time/Fall time
[ 2 ] Absolute Maximum Ratings
Min. Typ. Max.
Maximum supply voltage
V
CC
-0.3 - 4 V
Input voltage
V
IN
-0.3 -
V
CC
+ 0.3
V
Storage temperature range T_stg -40 - +125 °C
[ 3 ] Operating Range
Min. Typ. Max.
Supply voltage
V
CC
1.62 - 3.63 V
Supply voltage GND 0.0 0.0 0.0 V
Input voltage
V
IN
GND -
V
CC
V
CMOS load condition L_CMOS - - 15 pF
* Power supply startup time (0 %V
CC
→ 90 %V
CC
) should be between 5 μs and 500 ms
* A 0.1 μF or over bypass capacitor should be connected between V
CC
and GND pins located close to the device
[ 4 ] Frequency Characteristics
(Unless stated otherwise [ 3 ] Operating Range)
Min. Typ. Max.
Output frequency fo
0.67 170 MHz
Frequency tolerance *1 f_tol -50 - +50
×10
-6
Frequency aging f_age
×10
-6
*1 Frequency tolerance includes initial frequency tolerance, frequency / temperature characteristics, frequency / voltage coefficient,
frequency / load coefficient and frequency aging (+25 °C, 10 years)
Included in frequency tolerance
Unit
Conditions
Operating temperature
range
T_use
Parameter
Symbol
Specification
Unit
Conditions
Parameter
Symbol
Specification
OE/S̅ T̅ terminal
-40
+25
+105
°C
Parameter
Symbol
Specification
Unit
Conditions
OE/S̅ T̅ terminal
+25 °C, 10 years
T_use = -40 °C to +105 °C
SG-8018CA 25.000000MHz T J
H
P A
① ② ③
④
⑤
⑥
⑦
⑧
CG 2.5 mm × 2.0 mm P
Output enable (#1pin = OE)
CE 3.2 mm × 2.5 mm S
Standby (#1pin = S̅ T̅ )
CB 5.0 mm × 3.2 mm
CA 7.0 mm × 5.0 mm
A
Default
B
Fast
C
Slow
⑧Rise time/Fall time
②Size
⑦Function
Page 2 / 40 Spec No : SG-8018series_E_Ver1.01