www.xsens.com
Unless stated otherwise, all specifications are typical. Specifications subject to change without notice.
© Xsens, April 2021
2000 deg/s
10 deg/h
255 Hz
0.007 º/s/√Hz
0.001 º/s/g
16 g
30 µg
324 (x,y) 262 (z) Hz
120 µg/√Hz
+/- 8 G
0.5 mG
0.2%
0.25 mG
n/a
n/a
n/a
n/a
MTi-1
Smallest form factor on the market
Easy integration
Development Kit available
The MTi-1 is the smallest industrial grade self-con-
tained IMU available on the market. The Xsens
optimized strapdown algorithm (AttitudeEngine™)
performs high-speed dead-reckoning calculations
at 1 kHz, accurately capturing high-frequency
motions. The MTi-1 is a cost-effective module for
a wide range of (embedded) applications. It
relieves you of the work of designing, integrating
and maintaining gyroscopes, accelerometers and
other sensors.
The MTi-1 is part of the MTi 1-series supported by
the MT Software Suite, which includes MT Manag-
er (GUI for Windows/Linux), SDK, example codes
and drivers for many platforms.
IMU Performance
Accelerometer
Gyroscope
Strapdown Integration (SDI)
Calibrated
Calibrated
Yes
Gyroscope
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
g-sensitivity (calibr.)
Accelerometer
Standard full range
In-run bias stability
Bandwidth (-3dB)
Noise Density
Magnetometer
Standard full range
Total RMS noise
Non-linearity
Resolution
GNSS Receiver
GNSS receiver interface
GNSS precision
RTCM input port
Barometer
Barometer interface
Mechanical
IP-rating
Operating Temperature
Casing material
Mounting orientation
Dimensions
Connector
Weight
Electrical
Input voltage
Power consumption (typ)
Interfaces / IO
Interfaces
Sync Options
Protocols
Clock drift
Output Frequency
Built-in-self test
Software Suite
GUI (Windows/Linux)
SDK (Example code)
Drivers
Support
IP00
-40 to 85 ºC
PCB
No restriction, full 360º in all axes
12.1 x 12.1 x 2.55 mm
SMD, footprint compatible with JEDEC
PLCC-28
0.6 g
2.19 to 3.6V
44 mW @ 3V
UART, SPI, I²C
Yes
Xbus
10 ppm
Up to 1 kHz, 100 Hz SDI
Yes
MT Manager Firmware updater,
Magnetic Field Mapper
C++, C#, python, Matlab, Nucleo,
public source code
LabVIEW, ROS, GO
BASE by XSENS: online manuals,
community and knowledge base
12.10 mm
12.10 mm
3D models available on request
• Available online via Digi-Key, Mouser, Farnell and
local distributors
2.55 mm
www.xsens.com