Socay High Surge Micro Varistor
@SOCAY Electronics Corp., Ltd. 2021
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
SOCAY Electronics Corp., Ltd. www.socay.com
Solder cream in reflow soldering
Refer to the recommendable land pattern as printing
mask pattern for solder cream.
(1) Print solder in a thickness of 150 to 200μm
Precaution for handling of substrate
Do not exceed to bend the board after soldering thes product
extremely. (reference examples)
Mounting place must be as far as possible from the
position, which is close to the break line of board or on the
line of large holes of board.
Do not bend extremely the board, in mounting another
component. If necessary, use back-up pin (support pin) to
prevent from bending extremely.
Do not break the board by hand. We recommend to use
the machine or the jig to break it.
Construction & Dimensions
Pad Layouts & Precaution for handling of substrate