The Keysight Technologies, Inc. power dividers are an RF and microwave accessory construct by equivalent resistance of 50 Ω,
it’s used to divide power equally in a uniform transmission line for comparison measurements. The power divider provides a good
impedance match at both the output arms when the input is terminated in the system characteristic impedance (50 Ω). Once
a good source match has been achieved, the power divider may be used to divide the output into equal signals for comparison
measurements.
Product Fact Sheet
Keysight Power Dividers
Key measurements
– Broad operating frequency range up to 50 GHz
eliminates the need for multiple dividers
– Excellent amplitude (±0.3 dB) and phase tracking
(±2 °) ensures highly accurate power division
11636B power divider 87302C Hybrid power dividers 11636C power divider
– Low SWR 1.67 at 50 GHz minimizes measurement
uncertainty
This information is subject to change without notice.
© Keysight Technologies, 2017
Published in USA, December 1, 2017
www.keysight.com
Keysight | Power Dividers – Product Fact Sheet
For more detail information on “Agilent Power Divider”, please refer to product
literature number 5989-6698EN.
Download or order from www.keysight.com/find/mta
To find a distributor in your area, go to: www.keysight.com/find/distributors
Product specications
www.keysight.com/nd/services
Keysight Services helps you improve productivity and product
quality with our comprehensive service offerings of one-stop
calibration, repair, asset management, technology refresh,
consulting, training, and more.
5990-5215EN
Model Frequency Max SWR Maximum insertion loss (dB) Minimum isolation (dB) Maximum amplitude tracking (dB)
1
Maximum phase tracking (°)
1
11636A DC to 18 GHz 1.35 6.0 typ
2
– 0.5
3
±2 ° typ
11636B DC to 26.5 GHz 1.29 7.5 – 0.25
3
±2 ° typ
11636C DC to 50 GHz 1.67 8.5 – 0.30
4
±2 °
87302C
0.5 to 18 GHz 1.45
1.5
5
19 0.3
6
18 to 26.5 GHz
1.6
1.9
5
19
0.5
10
87303C
1.0 to 18 GHz 1.45
1.2
5
19 0.3
6
18 to 26.5 GHz
1.6
1.6
5
21
0.5 10
87304C
2.0 to 18 GHz 1.45 1.1
5
19 0.3 6
18 to 26.5 GHz 1.6 1.4
5
18 0.5 10
1. Amplitude and phase tracking are the ratio of one output to the other in dB or degrees, respectively.
2. 5.8 to 7.2 dB up to 10 GHz; 5.8 to 7.5 dB up to 18 GHz.
3. At 18 GHz.
4. At 50 GHz.
5. Insertion loss is in addition to 3 dB coupling loss.