JIANGSU ZHONGTIAN TECHNOLOGY CO.,LTD.
No.1 ZHONGTIAN ROAD,HEKOU TOWN,RUDONG COUNTY,JIANGSU
PROVINCE,P.R.CHINA
DECLARATION OF PERFORMANCE
No. ZTT-DOP-2.0mm（ZTT 0972） 28240342 001
1. Unique identification code of the product type:
Φ2.0mm Single Mode Optical Fiber Cable PVC
2. Type, batch or serial number or any other element allowing identification of the construction product as required
pursuant to Article 11(4):
Trade: ZTT, Type: ZTT-2.0mm
Overall Diameter: 2mm
3. Intended use or uses of the construction product, in accordance with the harmonised technical specification, as
foreseen by the manufacturer:
Transmission of communication signals in buildings and other civil engineering works with the objective of
limiting the generation and spread of fire and smoke
4. Name, registered trade name or registered trade mark and contact address of the manufacturer as required under
Article 11(5):
JIANGSU ZHONGTIAN TECHNOLOGY CO.,LTD.
No.1 ZHONGTIAN ROAD,HEKOU TOWN,RUDONG COUNTY,JIANGSU
PROVINCE,P.R.CHINA
5. Where applicable, name and contact address of the authorised representative whose mandate covers the tasks
specified in Article 12(2):
As above
6. System or systems of assessment and verification of constancy of performance of the construction product as set
out in CPR, Annex V:
AVCP System 3
7. In case of declaration of performance concerning a construction product covered by a harmonised standard:
Notified product certification body No. 1008 performed the determination of product type on the basis of type
testing, type calculation, tabulated values or descriptive documentation of the
product, carried out by the notified testing laboratory
8. Declared performance
Essential characteristics
Performance
Harmonized Technical specification
Reaction to fire
Eca
EN 50575:2014 + A1:2016
Dangerous substances
None
9. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in
point 8. This declaration of performance is issued under the sole responsibility of the manufacturer identified in
point 4.
Signed for and on behalf of the manufacturer by:
……………………………………………………………………………………………………………………………
2017.08.20
…………………………………………….. ……………………………………………………
(date of issue) (signature)