65
Conductive Polymer Aluminum Solid Capacitors
PV
series
PV
‧
Super low ESR,High ripple current capability
‧
Rated voltage :2.5~63V.
‧
Endurance:15,000hours at 105℃
‧
Applications:motherboards, servers,VGA ,etc.
‧
ROHS compliant
‧
Halogen Free compliant
SPECIFICATIONS
Items Conditions Characteristics
Category Temperature Range — -55 to +105℃
Rated Voltage Range — 2.5~63V
Capacitance Tolerance at 20℃,120HZ ±20%(M)
Surge Voltage at 105℃ Rated voltage ×1.15V
Leakage Current at 20℃after 2 minutes
I≦0.2CV or 300(μA) Whichever is greater
measured,after 2minutes application of rated
working voltage at +20℃.
Dissipation Factor ( tan δ) at 20℃,120Hz Please see the attached characteristics list
Characteristics of Impedance
at low, high temperature
at -55℃,100kHz Z(-55℃)/Z(+20℃) ≦ 1.25
at -25℃,100kHz Z(-25℃)/Z(+20℃) ≦ 1.15
Endurance
The following specications shall be satised
when the capacitors are restored to 20℃after
the rated voltage is applied for 15,000 hours at
105℃.
Appearance NO signicant damage.
Capacitance change ≦±20% of the initial value.
DF(tanδ) ≦150% of the initial specied value.
ESR ≦150% of the initial specied value.
Leakage current ≦The initial specied value.
Damp Heag (Steady State)
The following specications shall be satised
when the capacitors are restored to 20℃ after
subjecting them to subjecting them to store at
60℃, 90 to 95% RH for 1,000 hours ,without DC
applied.
Appearance NO signicant damage.
Capacitance change ≦±20% of the initial value.
DF(tanδ) ≦150% of the initial specied value.
ESR ≦150% of the initial specied value.
Leakage current ≦The initial specied value.
Surge Voltage
The capacitors shall be subjected to 1,000
cycles each consisting of charge with the surge
voltages specied at 105℃ for 30 seconds
through aprotective resistor (R=1kΩ) and
discharge for 5 minutes 30seconds
Appearance NO signicant damage.
Capacitance change ≦±20% of the initial value.
DF(tanδ) ≦150% of the initial specied value.
ESR ≦150% of the initial specied value.
Leakage current ≦The initial specied value.
※ Note:If any doubt arises,measure the leakage current after following voltage treatment.
Voltage treatment :DC rated voltage are applied to the capacitors for 120 minutes at 105℃.
(Unit:mm)
(+)
Polarity Marking
(Cathode)
Series Code
Rated Capacitance
Rated Voltage
W±0.2
C±0.2
D±0.5
P±0.2
R
0.3max
330
16
VA1212
H±0.2
L±0.3
(±0.5 for
ψ
8 &
ψ
10)
330
PV2020
16
Size Code
ψ
D L W H C R P
5×6 5.0 6.0 5.3 5.3 6.0 0.5~0.8 1.4
6.3×6 6.3 6.0 6.6 6.6 7.3 0.5~0.8 2.1
6.3×9.5 6.3 9.5 6.6 6.6 7.3 0.5~0.8 2.1
8×7 8.0 7.0 8.3 8.3 9.3 0.5~0.8 3.2
8x9.5 8.0 9.5 8.3 8.3 9.3 0.8~1.1 3.2
8×12 8.0 12.0 8.3 8.3 9.0 0.8~1.1 3.2
10×8 10.0 8.0 10.3 10.3 11.0 0.8~1.1 4.6
10×10.5 10.0 10.5 10.3 10.3 11.0 0.8~1.1 4.6
10×12.5 10.0 12.5 10.3 10.3 11.0 0.8~1.1 4.6
MARKING AND DIMENSIONS
66
Conductive Polymer Aluminum Solid Capacitors
series
PV
PV
PV SERIES STANDARD CHARACTERISITICS LIST
Rated
Voltage
(S.V.)
Cap
(μF)
Size DxL
Leakage current
(μA) max. ※2
ESR
(mΩ) max. 100k to
300kHz / 20℃
Rated Ripple
Current (mA rms)
100kHz / 105℃
D.F.
(tanδ) max.
120Hz / 20℃
2.5
(2.9)
220 5×6 300 40 1,620 0.12
330 6.3×6 300 20 2.690 0.12
820 6.3×9.5 410 18 3200 0.12
820 8×9.5 410 18 4520 0.12
1500 8×9.5 750 18 4520 0.12
1800 8×12 900 12 5200 0.12
2700 10×12.5 1,350 12 5,500 0.12
4
(4.6)
68 5×6 300 40 1,500 0.12
150 6.3×6 300 24 2,200 0.12
680 6.3×9.5 544 16 3,200 0.12
680 8×7 544 20 3,400 0.12
1000 8×9.5 800 16 4,500 0.12
1500 8×12 1,200 14 5,100 0.12
1800 10×12.5 1,440 12 5,500 0.12
2200 10×12.5 2,000 12 5,500 0.12
6.3
(7.2)
100 5×6 300 40 1500 0.12
220 5×7 300 20 1600 0.12
220 6.3×6 300 20 2400 0.12
560 6.3×9.5 705 20 3200 0.12
560 8×7 705 20 3300 0.12
820 8×9.5 1,033 15 4450 0.12
1000 8×9.5 1,260 15 4520 0.12
1200 8×12 1,512 12 5020 0.12
1500 10×10.5 1,890 15 5020 0.12
1800 10×12.5 2,268 12 5400 0.12
2200 10×12.5 2,772 12 5,500 0.12
10
(11.5)
68 5×6 300
40
1,500 0.12
120 6.3×6 300
25
2,420 0.12
150 8×7 300
22
2,450 0.12
330 6.3×9.5 660
20
3,200 0.12
560 8×9.5 1,120
16
4,450 0.12
680 8×9.5 1,360
16
4,450 0.12
820 8×12 1,640
14
4,850 0.12
1000 10×10.5 2,000
15
5,020 0.12
1200 10×10.5 2,400
15
5,200 0.12
1500 10×12.5 3,000
14
5,400 0.12
16
(18.4)
100 6.3×6 320 24 2,400 0.12
180 6.3×9.5 576 15 3,200 0.12
220 6.3×9.5 704 15 3,200 0.12
270 6.3×9.5 864 15 3,200 0.12
270 8×7 864 20 3,400 0.12
270 8×9.5 864 20 4,400 0.12
470 8×9.5 1,504 25 4,400 0.12
560 8×12 1,792 16 4,820 0.12
680 10×10.5 2,176 18 5,200 0.12
1000 10×12.5 3,200 16 5,400 0.12
※
1. Capacitance tolerance：±20%(M)
※
2. After 2 minutes