info@wilcoxon.com
Wilcoxon Sensing Technologies
wilcoxon.com
buy.wilcoxon.com
+1 (301) 330 8811
Features Benets Value
Accepts the most common
process automation
inputs (current, voltage,
thermocouple, RTD)
Ideal for large process control systems which need to
monitor multiple parameters simultaneously
Versatility
Doesn’t require experts
in vibration analysis
Compatible with 4-20mA vibration sensors
Reduces cost of adding
vibration monitoring
Customizable, red LED
4-digit localized display
Can be programmed via front panel or remotely with
included DisplayMate software
Simple and easy to
congure
Useful in applications where visual-only operating
conditions are needed
Direct access to data in
the eld
Programmable via front
panel or remotely
Meter can be modied in the eld, copied from another
meter, or individually programmed before use
Programming exibility
Multiple options for
powering, output, and
relays
Meter can function as a standalone display and/or connect
to plant infrastructure, allowing easy access to data
Reduces equipment
costs
Can provide 24 VDC power to the transmitter’s 4-20mA
signal, eliminating the need for redundant cable runs
Users can select the meter most suited to the application Cost-eciency
NEMA 4X / IP65 front panel
Dust-tight and protected from water jets, prevents
contamination in industrial settings, high reliability
Durability, reduces
replacement costs
PCD100 series process display meters
Solves these common problems:
• Can only access sensor data via control system
• Inability to program alarm limits or other
parameters in the eld
• Need for multiple meters for dierent inputs
• Process automation specialists
• Instrumentation engineers
• System engineers
• Reliability engineers
Typical users
• Oil and gas
• Chemical processing
• Pharmaceutical
• Food & beverage processing
Ideal markets and applications
• Process monitoring
• Manufacturing
• General condition
monitoring
info@wilcoxon.com
Wilcoxon Sensing Technologies
wilcoxon.com
buy.wilcoxon.com
+1 (301) 330 8811
PCD100 series process display meters
Ordering information
85-265 VAC 12-36 VDC Options installed
PCD100-265-B-N-0 PCD100-24-B-N-0 none
PCD100-265-B-N-200 24 VDC transmitter supply
PCD100-265-B-2R-0 PCD100-24-B-2R-0 2 relays
PCD100-265-B-2R-200 2 relays + 24 VDC transmitter supply
PCD100-265-B-420-0 PCD100-24-B-420-0 4-20 mA output
PCD100-265-B-420-200 4-20 mA output + 24 VDC transmitter supply
PCD100-265-B-420-240 4-20 mA output + dual 24 VDC transmitter supplies
PCD100-24-B-2R420-0 2 relays + 4-20 mA output
PCD100-265-B-R420-200 2 relays + 4-20 mA output + 24 VDC transmitter supply
Acknowledge relays
Acknowledge an alarm state or accept
a menu item in programming mode.
Menu
Access programming mode
or return to run mode.
Max
Display the highest and lowest process values
shown on the meter while in run mode, or change
value while in programming mode.
Reset
Reset the high or low value while
it’s being displayed, or select a new
digit in programming mode.
NEMA 4X / IP65 front panel
Programmable front panel display
Models available