Page 2
Find us at www.keysight.com
Definitions and Conditions
Specification (spec): represents warranted performance of a calibrated instrument that has
been stored for a minimum of 2 hours within the operating temperature range of 0 to 55 °C,
unless otherwise stated, and after a 1 hour warm-up period. The specifications include
measurement uncertainty. Data represented in this document are specifications unless
otherwise noted.
Typical (typ): describes additional product performance information. It is performance beyond
specifications that 80% of the units exhibit with a 95% confidence level at room temperature
(approximately 25 °C). Typical performance does not include measurement uncertainty.
Nominal (nom): describes the expected mean or average performance, or an attribute whose
performance is by design, such as the 50 Ω connector. This data is not warranted and is
measured at room temperature (approximately 25 °C).
Measured (meas): describes an attribute measured during the design phase for purposes
of communicating expected performance, such as amplitude drift vs. time. This data is not
warranted and is measured at room temperature (approximately 25 °C).
All of the above apply when using the instrument in its default settings unless otherwise stated.
This data sheet provides a summary of the key performance parameters for the N5193A UXG
Agile Signal Generator. All options referenced in this data sheet are described in the UXG
configuration guide (5992-1116EN).
Unless otherwise noted, this data sheet applies to units with serial numbers ending with
5646xxxx or greater and firmware revision A.01.86.