Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
We are always happy to take your call at +86 (022) 59677688.
DIP switches to set alarm functions
Full compliance with IEEE802.3, 802.3u stantards
Non-blocking, store-and-forward switching
Autonegotiation at all 10/100Base-TX ports
Auto-MDI/MDIX (crossover) at all 10/100Base-TX ports
Data
Technical data
Switching mode Store‐and‐forward; non-blocking
Number of 100Base-TX ports 8
Communication standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Flow Control
Redundancy function Redundant DC power supply
Configuration options DIP switch for signal contact
Diagnostics Signal contact
MAC table (size) 2000 addresses
Jumbo frame size 1536. Byte
Supply voltage 9 … 48VDC;Cable length:< 3 m
Power consumption (max.) 5.28 W
Power consumption typ. (24 V) 4.56 W
Baud rate Copper cable:10/100Mbit/s
Transmission medium (communication/fieldbus) Copper cable:Cat. 5 or higher, 100 m maximum cable length
Packet throughput 148,800 pkt/s
Controls 12 x DIP switch: Alarm function power supplies and ports 1 … 8
Indicators Device: LED (PWR, RPS) green: Power supply (primary), redundant
power supply (secondary); LED (ALM) red: Alarm; per port: LED (100,
LNK/ACT) green: Status 100 Mbps, LNK/ACT ports 1 … 8
Connection data
Connection technology: communication/fieldbus Copper cable:8 x RJ-45
Connection technology: supply 1 x Built-in male connector: 231-436/001-000; included female
connector (MCS Connectors): 231-106/026-000
Physical data
Width 50mm/ 1.969inch
Height 162mm/ 6.378inch
Depth from upper edge of DIN-rail 120mm/ 4.724inch