HVC
+ + + + +
Type Case Size TCR Value Tolerance Terminaon
High-Voltage
Chips
See dimension
table.
Custom case
sizes are
available.
Please consult
factory.
E ±25ppm/°C
H ±50ppm/°C
K ±100ppm/°C
L ±200ppm/°C
Resistance value
expressed as a
four digit number,
where the rst
three numbers are
the signicant
value, and the
fourth number is
the number of
zeroes.
B ±0.1%
C ±0.25%
D ±0.5%
F ±1.0%
G ±2.0%
J ±5.0%
K ±10%
L ±20%
T Solderable wraparound
mae n Sn99.9 on Ni
barrier, RoHS
B Solderable wraparound
Sn63Pb37 solder over Ni
barrier
Z Solderable single surface
mae n Sn99.9 on Ni
barrier, ip-chip, RoHS
S Solderable single surface
Sn63Pb37, ip-chip
U Epoxy bondable gold
wraparound over Ni
The connuous maximum applied voltage cannot exceed the maximum power rang and is ohmic value dependent.
Value range is case size dependent.
Standard case sizes: 0402, 0403, 0502, 0504, 0603, 0805, 1004, 1005, 1206, 1210, 1505, 2010, 2208, 2510, 2512, 3512, 4020, 5020.
For custom sizes and conguraons, consult sales@ohmcra.com.
How to Order
HVC Series
High Voltage Chip Resistors
Case Size TCR Tolerance
Rangs (±ppm/°C) 0.10% 0.25% 0.50% 1% 2% 5% 10% 20%
0402
40mW
150V
50 10K-100M 10K-100M 10K-100M 10K-100M 10K-100M
100 10K-500M 10K-500M 10K-500M 10K-500M 10K-500M
200 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G
0603
60mW
400V
50 10K-10M 10K-100M 10K-500M 10K-500M 10K-500M 10K-500M
100 10K-10M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-500M 10K-1G 10K-1G 10K-10G 10K-50G
0805
200mW
600V
50 10K-10M 10K-500M 10K-500M 10K-500M 10K-500M 10K-500M
100 10K-10M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-1G 10K-1G 10K-10G 10K-10G 10K-50G
1206
330mW
1500V
25 1M-10M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M
50 100K-10M 100K-100M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M
100 10K-10M 10K-100M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 10K-50G
2010
1W
2000V
25 1M-10M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M 1M-100M
50 100K-10M 100K-100M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M 100K-500M
100 10K-10M 10K-100M 10K-500M 10K-1G 10K-1G 10K-1G 10K-1G 10K-1G
200 10K-10M 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 10K-50G
2512
2W
3000V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
3512
2W
3500V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
4020
2W
4000V
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
25 1M-100M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M 1M-500M
5020
2W
5000V
50 100K-100M 100K-500M 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G 100K-1G
100 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-10G 100K-10G
200 10K-100M 10K-500M 10K-1G 10K-10G 10K-10G 10K-10G 100K-50G 100K-50G
• Ultra High Stability
• Very Low Noise
• Tolerances to 0.1%
��� TCR to 25 ppm/°C
• VCR to 1 ppm/V
• Custom Conguraons
Advantages
Our patented Micropen® precision prinng technology provides superior precision, thick-lm high voltage surface mount
resistors. Ohmcra’s Micropenned serpenne paerned resistors produce superior electrical characteriscs:
Electrical Specicaons
Rev 2008
• Voltage Rangs to 5000 Volts
• Resistance Values to 50 Gigohms
Packaging opons: Bulk, Tape & Reel or Flat Pack
Test Maximum ∆R
Short Time Overload 0.1%
Load Life 0.1%
Thermal Shock 0.1%
Resistance to Soldering Heat 0.05%
Material Construcon
Resisve Element Thick Film
Substrate 96% Alumina
Encapsulaon Epoxy
Terminaon Tin over nickel barrier, lead solder over
nickel barrier, or gold.
Custom Conguraons Available
Upon Request
Please consult with our knowledgeable sales sta for
help specifying custom parts to meet your needs:
E: ohmcrasales@exxelia.com
P: 585.624.2610
www.ohmcra.com
93 Paper Mill St.
Honeoye Falls, NY 14472
Chip Dimensions
Wrap-around
B and T Terminaons
Bondable
G, Z, and S Terminaons
Case Size
Length
Width
Thickness
(Max.)
DT
DB
Units
0402
0.040 ±0.005
1.02 ±0.13
0.020 ±0.003
0.51 ±0.08
0.020
0.51
0.008 ±0.004
0.20 ±0.10
0.010 +0.002/-0.004
0.25 +0.05/-0.10
inches
mm
0603
0.063 +0.01/-0.005
1.60 +0.25/-0.13
0.031 ±0.005
0.79 ±0.13
0.020
0.51
0.010 ±0.005
0.25 ±0.13
0.012 ±0.008
0.30 ±0.20
inches
mm
0805
0.079 +0.01/-0.005
2.01 +0.25/-0.13
0.050 ±0.005
1.27 ±0.13
0.025
0.64
0.010 ±0.005
0.25 ±0.13
0.013 ±0.008
0.33 ±0.20
inches
mm
1206
0.126 +0.01/-0.005
3.20 +0.25/-0.13
0.063 ±0.005
1.60 ±0.13
0.030
0.76
0.010 ±0.005
0.25 ±0.13
0.020 ±0.010
0.51 ±0.25
inches
mm
2010
0.200 +0.01/-0.005
5.08 +0.25/-0.13
0.100 ±0.005
2.54 ±0.13
0.030
0.76
0.018 ±0.010
0.46 ±0.25
0.020 ±0.010
0.51 ±0.25
inches
mm
2512
0.250 +0.01/-0.005
6.35 +0.25/-0.13
0.125 ±0.005
3.18 ±0.13
0.030
0.76
0.020 ±0.010
0.51 ±0.25
0.024 ±0.010
0.61 ±0.25
inches
mm
3512
0.350 +0.01/-0.005
8.89 +0.25/-0.13
0.125 ±0.005
3.18 ±0.13
0.030
0.76
0.020 ±0.010
0.51 ±0.25
0.024 ±0.010
0.61 ±0.25
inches
mm
4020
0.400 +0.01/-0.005
10.16 +0.25/-0.13
0.200 ±0.005
5.08 ±0.13
0.030
0.76
0.025 ±0.010
0.64 ±0.25
0.030 ±0.010
0.76 ±0.25
inches
mm
5020
0.500 +0.01/-0.005
12.70 +0.25/-0.13
0.200 ±0.005
5.08 ±0.13
0.030
0.76
0.025 ±0.010
0.76 ±0.25
0.030 ±0.010
0.76 ±0.25
inches
mm
Typical Performance Characteriscs
Power Derang Curve
Ambient Temperature °C
150
100
50
0
% of Rated Power
25
50
150
75
125
100
Other available case sizes: 0403, 0502, 0504, 1004, 1005, 1210, 1505, 2208, 2510, and custom. Please contact sales@ohmcra.com.
Parameter Typical
Operang Temperature -55°C to 150°C
TCR Measured from 25°C to 75°C
Pulse Capability
10X rated waage
For custom pulse applicaons consult factory
Resistance Value
Values > 10M are measured at 100 VDC
For custom test voltages consult factory
HVC Series
Tape and Reel Specicaons
Parts are packaged in accordance with EIA-481
tape and reel specicaons.
Rev 2008