Features
◼ V
IN
Voltage: Support 2.5-V, 3.3-V and 5-V Power Rails
◼ V
LDOIN
Voltage Range: 1.1 V to 3.5 V
◼ Flexible Input Voltage Tracking Directly from REFIN or
Through External Resistor Divider
◼ 3-A Sink and Source Current Capability for DDR
Termination
◼ Integrated Power MOSFETs
◼ Output Remote Sensing
◼ Fast Load-Transient Response
◼ Open-Drain Power Good to Monitor OUT Regulation
◼ Built in Soft-Start and UVLO, Current Limit and Thermal
Shutdown Protection
◼ Support DDR, DDR2, DDR3, DDR3L, Low Power DDR3
and DDR4 VTT Applications
◼ Operating Temperature Range: –40°C to +125°C
◼ Small Package with 3×3 DFN-10
◼ Pb−Free and are RoHS Compliant
Applications
◼ Memory VTT Regulator for DDR, DDR2, DDR3, DDR3L,
Low Power DDR3 and DDR4
◼ Notebooks, Desktops, and Workstations
◼ Servers, Networking equipment and Datacenters
◼ Telecom and Base Station
Description
With the development of main processors in PCs and servers,
more and more source double-data-rate (DDR) memories are
required in the mainboard, where the input voltage becomes
lower and lower, and space limitation becomes higher and
higher.
The TPL51200 series devices are 3-A sink and source DDR
termination regulators specifically designed for the DDR
applications with heavy space limitation. The TPL51200 series
devices implement a fast load-transient response and only
requires a minimum output capacitance of 20 μF.
The TPL51200 series devices support a remote-sensing
function and all power requirements for DDR VTT bus
termination. In addition, the TPL51200 series devices provide
an open-drain PG signal for VTT regulation indication and an
EN signal that can be used to discharge VTT for DDR
applications.
The TPL51200 series devices are available in the thermally
efficient 10-pin 3×3 DFN package with thermal pad, and support
the operating temperature range from –40°C to +125°C.
Typical Application Schematic