© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 11/10/20
2AG > Fast-Acting > 2206 Series
Axial Lead & Cartridge Fuses
Average Time Current Curves
Temperature Rerating Curve
100
10
1
0.1
0.01
0.001
0.1 110 100 1000
.750A
1.00A
2.00A
3A
TIME IN SECONDS
CURRENT IN AMPERES
Soldering Parameters - Wave Soldering
Dwell Time
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
0
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
Time (Seconds)
Temperature (°C) - Measured on bottom side of board
Cooling Time
Preheat Time
Wave Parameter Lead-Free Recommendation
Preheat:
(Depends on Flux Activation Temperature)
(Typical Industry Recommendation)
Temperature Minimum: 100° C
Temperature Maximum: 150° C
Preheat Time: 60-180 seconds
Solder Pot Temperature: 260° C Max
Solder Dwell Time: 2-5 seconds
Recommended Hand-Solder Parameters:
Solder Iron Temperature: 350° C +/- 5°C
Heating Time: 5 seconds max.
Note: These devices are not recommended for IR or Convection Reflow process.
Recommended Process Parameters:
Note:
1. Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.