Cable Connector Class F
A
–
Fully Shielded Cable Connector for
Field Assembly
2
METZ CONNECT – Cable Connector Class F
A
Cable Connector Class F
A
There may be situations when maintaining or extending
network cablings but also when installing a new one
that a cable is just a bit too short. A possible soluti-
on would be to replace this cable in its whole length –
an action involving in any case high effort and being
sometimes even impossible due to the local conditions.
The cable connector Class F
A
is the easy and smart
solution to extend or to connect data cables without
any special tool. By its slim and round design it can be
used everywhere, even in restricted space. The cable
connector Class F
A
is a must-have for the basic equip-
ment of any tool box!
Benefits
cable connector for field assembly Class F
A
for
8 wire cables
to connect/extend/repair/relocate copper
data cables up to Cat.7
A
compliance to Class F
A
up to 1000 MHz according
to ISO/IEC 11801 Ed.2.2:2011-06 in connection
with Cat.7
A
copper cables
*1
GHMT certified to ISO/IEC 11801 Ed.2.2:2011-06
and IEC 61156-5 Ed.2.1:2012-12
suitable for 10 GBit Ethernet (IEEE 802.3an),
Remote Powering (PoE, PoE plus and UPoE)
and HDBaseT
compact design: diameter 16.8 mm x length 64 mm
IP67 protected housing in combination with
IP67 appropriate cables
*2
refined zinc die-cast housing
easy and fast assembly without special tools
shield connection and strain relief integrated
easy connection of data cables AWG 26/1 to 22/1
(solid wire) and AWG 26/7 to 22/7 (stranded wire)
to insulation displacement connectors (IDC)
solid copper wire diameter 0.4 to 0.64 mm
stranded copper wire diameter 0.48 to 0.76 mm
conductor diameter up to 1.6 mm
suitable for cables with an overall
diameter of 5.0 to 9.7 mm
*2
fully shielded version according to DIN EN 50173-1
*1, *2 see data sheet for more detailed specification