Data sheet
Cable connector class F
A
Page 1/5
P/N
130863-02-E
EAN 4250184159247
2018-30-01
Illustrations
Dimensional drawing
See enlarged drawings at the end of document
Product specification
• cable connector for field assembly Class F
A
for 8 wire cables
• to connect / extend / repair / relocate copper data cables up to Cat.7
A
• compliance to Class F
A
up to 1000 MHz according to ISO/IEC 11801 Ed.2.2:2011-06 in connection with Cat.7
A
copper cables *1
• GHMT certified to ISO/IEC 11801 Ed.2.2:2011-06 and IEC 61156-5 Ed.2.1:2012-12
• suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT
• compact design: diameter 16.8 mm x length 64 mm
• IP67 protected housing in combination with IP67 appropriate cables *2
• refined zinc die-cast housing
• easy and fast assembly without special tools
• shield connection and strain relief integrated
• easy connection of data cables AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors
(IDC)
• solid copper wire diameter 0.4 to 0.64 mm
• stranded copper wire diameter 0.48 to 0.76 mm
• conductor diameter up to 1.6 mm
• suitable for cables with an overall diameter of 5.0 to 9.7 mm *2
• fully shielded version according to DIN EN 50173-1
Data sheet
Cable connector class F
A
Page 2/5
P/N
130863-02-E
EAN 4250184159247
2018-30-01
Technical Data
General Data
Design Cable connector
Shielding shielded
Transmission technology Copper
Color metallike
Dimensions
Dimension (L x W x H) 62.00 x 16.80 x 16.80 mm
Dimension (L x W x H) 2.441 x 0.661 x 0.661 in.
Weight 27.00 g
Weight 0.06 lb
Field assembly ability yes
Transmission characteristics
Class (ISO/IEC) F
A
*1 (with cable lengths of 20 m and above on the left and right
side of the cable connector)
Remote Powering yes
PoE IEEE 802.3af
PoE plus IEEE 802.3at
UPoE yes
HDBaseT yes
Transmission rate up to 10 GBit IEEE 802.3an
Connections/interfaces
Connector technology interface 1 IDC-connection
Connector technology interface 2 IDC-connection
Termination data, solid wire (min. - max.)
Conductor cross section, solid wire AWG 26/1 - 22/1
Conductor cross section, solid wire 0.128 - 0.324 mm²
Conductor diameter, solid wire (bare copper) 0.409 - 0.643 mm
Conductor diameter, solid wire (bare copper) 0.016 - 0.025 in.
Termination data, stranded wire (min. - max.)
Conductor cross section, stranded wire AWG 26/7 - 22/7
Conductor cross section, stranded wire 0.141 - 0.355 mm²
Conductor diameter, stranded wire (bare copper) 0.483 - 0.762 mm
Conductor diameter, stranded wire (bare copper) 0.019 - 0.030 in.