Page 1Find us at www.keysight.com
DATA SHEET
Nemo Backpack
Reduce Indoor and Outdoor Benchmarking Testing Costs
Nemo Backpack is a compact and cost-effective benchmarking solution for indoor
and outdoor use with Nemo Outdoor. With high quality lithium-ion batteries, Nemo
Backpack can be used as a standalone system without an external power source.
When mounted on a vehicle, an external +12 V power source can be used to
power up the devices or charge batteries. Perform benchmarking measurements
on several technologies and networks simultaneously with support for up to twelve
test handsets or USB modems and 1-2 scanner receivers. Furthermore, together
with the Nemo Outdoor Multi option, the system allows the simultaneous use of
different combinations of measurement modes, such as, voice calls, voice quality
calls, and data transfers. The system is connected to a Tablet PC or a laptop.
Features
Flexible - use as a standalone system without an external power source or
mounted on a vehicle with an external +12 V DC power source
Lightweight and ergonomic – a custom-made, high-quality backpack
Compact - carry on most aircraft as hand luggage
Built-in lithium-ion battery packs - perform long measurement campaigns
Hot-swappable batteries
Audible low voltage warning
High-quality industrial USB 3.0 hubs
Use with up to twelve UEs and with the following scanning receivers:
- Nemo FSR1, 1pcs
- PCTEL EXflex, 1 pcs
- PCTEL IBflex, 1 pcs
- R&S TSME, 2 pcs
Standard compliance and safety testing
Page 2Find us at www.keysight.com
Technical Specifications
Computer requirements
PC (IBM or Dell recommended) with Windows 7
(32/64 bit), Windows 10 (64 bit)
For multi-data and voice quality measurements
Intel Quad Core processor i7 2.26 GHz or higher
recommended
512 MB RAM minimum, 1 GB RAM recommended
100 MB of free hard disk space for installation and
use, 1 GB recommended
Interfaces
Two USB 3.0 compliant B port (In)
14 USB 3.0 compliant ports (Out)
Main power switch/LED
Neutrik +12 V DC lockable power connector
Two +12 V DC regulated auxiliary outputs (7 A
combined)
Power specifications
Input: +12 V DC nominal (10 – 17 V DC range),
max 15 A
Battery capacity: 3 x Lithium-ion 6.8 Ah, 73 Wh
(total 20.4 Ah)
Battery low voltage warning. Audible warning
approx. 5 minutes before batteries are running out
Charging indicators
Supported devices
Test terminals and modems with USB ports (1-12)
USB GPS receivers
1-2 scanner receivers
Measurement and benchmarking capabilities
Voice connections: up to twelve networks
Voice quality: up to twelve networks connections.
Requires Nemo Active Testing Application (NATA)
with smartphones.
Data connections: up to twelve networks. Requires
NATA with smartphones.
Terminals and technologies:
- Supports more than 200 test devices, including
USB modems and Samsung and Qualcomm-
based terminals
- Supports any combination of technologies
ranging from GSM to 5G NR
Standards Compliance
The product complies with the essential requirements
of the following applicable European Directives, and
carries the CE marking accordingly:
Low Voltage Directive 2014/35/EU
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
EMC standard compliance tests
IEC 61326-1:2012 / EN 61326-1:2013
CISPR 11:2009+A1:2010 / EN
55011:2009+A1:2010
IEC 61000-4-2:2008 / EN 61000-4-2:2009
IEC 61000-4-3:2006+A1:2007+A2:2010 / EN
61000-4-3:2006 +A1:2008+A2:2010
IEC 61000-4-4:2004+A1:2010 / EN 61000-4-
4:2004+A1:2010
IEC 61000-4-5:2005/ EN 61000-4-5:2006
IEC 61000-4-6:2008 / EN 61000-4-6:2009
IEC 61000-4-8:2009 / EN 61000-4-8:2010
IEC 61000-4-11:2004 / EN 61000-4-11:2004
CISPR 25
ISO 7637-2:2011
Safety testing
IEC 61010-1:2010 / EN 61010-1:2010
RoHS
EN 50581:2012