Circular connectors
M12x1 IP67
Connector series for industrial applications
D
coded
PoE+
10 GBE
X
coded
Data transmission connectors
M12 Series
M12x1 Bulkhead Sockets X-coded IP67
plug interface
IEC 61076-2-109:2014
fourfold shield
connection
full metal shielding
between contact pairs
one foot print for all
bulkhead socket designs
Mechanical Characteristics
Connectors IEC 61076-2-109:2014
Insertion force ≤ 30 N
Durability (mating cycles) ≥ 100
Material: housing zinc diecast nickel plated / brass nickel plated
Material: contact body PA
Material: contacts CuSn
Material: contact finish Au
Material: gaskets FKM; NBR
Environmental Requirements
Shock 50 g
Protection against particulate ingress IP6X
Protection against water / immersion IPX7
Ambient temperature -40° C to +85° C
Electrical Characteristics
Contact resistance ≤ 5 mΩ
Insulation resistance
≥ 100 MΩ
Voltage proof: contact-contact ≥ 500 V, DC
Voltage proof: contact-shield ≥ 500 V, DC
PoE+ acc to IEEE 802.3at Adequate for Power over Ethernet+
Transmission Characteristics
10 Gigabit Ethernet acc. to IEEE 802.3an Adequate for 10 Gigabit Ethernet
Category 6
A
ISO/IEC 11801; DIN EN 50173-1
Class E
A
ISO/IEC 11801; DIN EN 50173-1
M12x1 Bulkhead Socket X-coded
An important part of the M12x1 connector series are the bulkhead
sockets in Cat.6
A
. They are available with housings for front or
back mounting as well as versions without housings with a
fourfold shield connection to the printed circuit board and feature
versatile mounting possibilities.
M12x1 Cable Plug X-coded IP67
robust zinc die cast
housing
shield cover for
360° shielding
contact
full metal shield between
pairs of wire
plug interface
IEC 61076-2-109:2014
vibration protection
wire manager visually
coded to connector
housing
insulation displacement
contact (IDC) AWG27-22/7
and AWG24-22/1
M12x1 Cable Plug X-coded
Mechanical Characteristics
Connectors
IEC 61076-2-109:2014
Insertion force ≤ 30 N
Durability (mating cycles) ≥ 100
Material: housing zinc diecast nickel plated / brass nickel-plated
Material: wire pair presorting PA UL94 V0
Material: shield German silver
Material: pressure screw brass nickel-plated
Material: contacts brass
Material: contact finish Au over Ni
Wire diameter 0.9 - 1.6 mm
Cu-Conductor diameter: stranded 0.46 - 0.76 mm (AWG27 - 22/7)
Cu-Conductor diameter: solid 0.51 - 0.64 mm (AWG24 - 22/1)
Cable diameter 5.5 - 9.0 mm
Environmental Requirements
Shock 50 g
Protection against particulate ingress IP6X
Protection against water / immersion IPX7
Ambient temperature -40° C to +85° C
Electrical Characteristics
Contact resistance ≤ 10 mΩ
Insulation resistance
≥ 100 MΩ
Voltage proof: contact-contact ≥ 500 V, DC
Voltage proof: contact-shield ≥ 500 V, DC
PoE+ acc to IEEE 802.3at Adequate for Power over Ethernet+
Transmission Characteristics
10 Gigabit Ethernet acc. to IEEE 802.3an Adequate for 10 Gigabit Ethernet
Category 6
A
ISO/IEC 11801; DIN EN 50173-1
Class E
A
ISO/IEC 11801; DIN EN 50173-1
The basic structure of the new connector with X-coding
corresponds to M12 system in world-wide use that has found its
way into applications in many different branches with extreme
conditions thanks to its compact design and industrial
compatibility. The extremely robust M12x1 connector in Cat.6
A
from the programme can be fitted on site without any special
tools. This assembly-friendly connector also features very good
shield contacting and covers a wide range of wire diameters
(0.9 – 1.6 mm) and cable diameters (5.5 – 9 mm).
1