Delivers Benchtop Accuracy and MIL-Spec Durability to
Field Applications
Keysight Technologies, Inc. FieldFox brings bench-level accuracy into the eld by delivering
precise handheld RF and microwave measurements that agree with benchtop analyzers.
FieldFox RF and microwave analyzers include: spectrum analyzers (N993x), full 2-port vector
network analyzers (N992x), and all-in-one combination analyzers (N991x). The combination
analyzer’s base function is a cable and antenna analyzer and can be congured to include
spectrum and network analysis.
Product Fact Sheet
Keysight 14 FieldFox Analyzers, 4/6.5/9/14/18/26.5 GHz
Key differentiators
– Rugged and weather resistant:
– Meets MIL-PRF-28800F Class 2
– Meets IEC/EN 60529 IP53 requirements
– Type tested and meets Procedure 1 requirements for operation in
explosive environments.
MIL-810G, Method 511.5
– No vents or fans extends instrument reliability and withstands salty,
humid environments with wide operating temp of −10 to +55 °C
(14 to 131 °F)
– Portable:
– Compact, light weight 3.0 kg (6.6 lbs) package
– FieldFox analyzers:
– Spectrum analyzer provides best amplitude accuracy ± 0.5 dB,
no warm up required
– Real-time spectrum analyzer (RTSA) with 10 MHz bandwidth and
minimum detectable signal as short as 22 ns
– VNAs offer the most accurate calibration technique
(full 2-port unknown thru)
– VNAs can test cable and antenna systems without external cal kits
(QuickCal and CalReady)
– Built-in microwave independent signal source with attened power
output makes system verication easier in the eld
– Full-band tracking generator
N991xA N992xA N993xA
Cable/antenna analyzer
⦁ ⦁
Spectrum analyzer
⦁ ⦁
Real-time spectrum analyzer
⦁ ⦁
Vector network analyzer
⦁ ⦁
Tracking generator
⦁ ⦁
Independent CW source
⦁ ⦁
This information is subject to change without notice.
© Keysight Technologies, 2017
Published in USA, December 1, 2017
www.keysight.com
Keysight | 14 FieldFox Analyzers, 4/6.5/9/14/18/26.5 GHz – Product Fact Sheet
Function Description
Cable antenna analyzer and vector network analyzer
Frequency 30 kHz to 9 GHz, 14 GHz, 18 GHz, 26.5 GHz
Dynamic range Up to 100 dB
Output power Up to +2 dBm
Spectrum analyzer
Frequency 5 kHz to 9 GHz, 14 GHz, 18 GHz, 26.5 GHz
Spur-free dynamic range ≥ 105 dB
Phase noise −111 dBc at 10 kHz offset
Independent source
Frequency 30 kHz to 9 GHz, 14 GHz, 18 GHz, 26.5 GHz
Real-time spectrum analyzer (RTSA)
Frequency 5 kHz to 4GHz, 6.5 GHz, 9 GHz, 18 GHz, 26.5 GHz
Maxixmum real-time bandwidth 10 MHz
Minimum signal duration with 100% POI at full
amplitude accuracy
12.2 µs
General
Environmental Meets MIL-PRF-28800F Class 2
Temperature Operating: −10 to +55 °C (14 to 131 °F)
Dimensions and weight 11.5" x 7.4” x 2.8” (292 x 188 x 72 mm), < 3 kg (6.6 lbs) with battery
FieldFox Analyzer Options
The FieldFox base unit consists of a cable and antenna analyzer, or spectrum analyzer,
or VNA. The following accessories are included: AC/DC adapter, 1 battery, soft carrying
case, LAN cable, quick reference guide and user’s guide (optional).
www.keysight.com/nd/FieldFox
www.keysight.com/nd/eldfox-free-trials
www.keysight.com/nd/services
Keysight Services helps you improve productivity and product
quality with our comprehensive service offerings of one-stop
calibration, repair, asset management, technology refresh,
consulting, training, and more.
5991-0756EN
Model number Frequency Description
N991xA
N9913A 4 GHz FieldFox RF combination analyzer
N9914A 6.5 GHz FieldFox RF combination analyzer
N9915A 9 GHz FieldFox microwave combination analyzer
N9916A 14 GHz FieldFox microwave combination analyzer
N9917A 18 GHz FieldFox microwave combination analyzer
N9918A 26.5 GHz FieldFox microwave combination analyzer
N992xA
N9925A 9 GHz FieldFox microwave vector network analyzer
N9926A 14 GHz FieldFox microwave vector network analyzer
N9927A 18 GHz FieldFox microwave vector network analyzer
N9928A 26.5 GHz FieldFox microwave vector network analyzer
N993xA
N9935A 9 GHz FieldFox microwave spectrum analyzer
N9936A 14 GHz FieldFox microwave spectrum analyzer
N9937A 18 GHz FieldFox microwave spectrum analyzer
N9938A 26.5 GHz FieldFox microwave spectrum analyzer
Option Feature N991xA N992xA N993xA
CAT/vector network analysis Combo VNA SA
010 VNA time domain
⦁ ⦁
—
112 QuickCal
⦁ ⦁
—
210 VNA transmission/reection
⦁ ⦁
—
211 VNA full 2-port S-parameters
⦁ ⦁
—
212 1-port mixed mode S-parameters
⦁ ⦁
—
215 TDR cable measurements
⦁ ⦁
—
305 Cable and antenna analyzer
Std
⦁
—
308 Vector voltmeter
⦁ ⦁
—
320 Reection measurements (RL,VSWR)
Std Std
⦁
Spectrum analysis
209 Extended range transmission analysis (ERTA)
⦁
—
⦁
220 Full-band tracking generator Opt 210 (+233)
—
⦁
233 Spectrum analyzer
⦁
— Std
235 Preamplier
⦁
—
⦁
236 Interference analyzer
⦁
—
⦁
238 Spectrum analyzer time gating
⦁
—
⦁
312 Channel scanner
⦁
—
⦁
350
1
Real-time spectrum analyzer (RTSA)
⦁
—
⦁
355 Analog demodulation
⦁
—
⦁
Power measurements
208 USB power sensor vs frequency
⦁ ⦁ ⦁
302 External USB power sensor support
(sensor sold separately)
⦁ ⦁ ⦁
310 Built-in power meter
⦁ ⦁ ⦁
330 Pulse measurements with power sensor
⦁ ⦁ ⦁
System features
030 Remote control capability
⦁ ⦁ ⦁
307 Built-in GPS receiver (antenna sold separately)
⦁ ⦁ ⦁
309 DC bias variable voltage source
⦁ ⦁ ⦁
N9910X FieldFox accessories: Adapters, antennas, cables, etc.
N9911X Economical waveguide calibration components
1. RTSA capability is only available for N991x/3x with serial number prex starting with MY5607/SG5607/
US5607 or upgraded with Option N9910HU-100/300/400.