Description

Product Compatibility

Please refer to product datasheets for compatibility details to suit your application.

Ordering

To order, select product code from the table and specify country of application.

Product Code Description

ETH-C5X Ethernet Cable - 2m (6.5’), Cross Over, RJ45 to RJ45

Specifications

Termination

Module/Host RJ45

Configuration

Cross Over Cat 5

General

Length 2m (6.5’)

Note: Specifications subject to change.

The ETH-C5X Cross Over Ethernet Cable is designed to connect ELPRO

Ethernet products to peripheral Ethernet devices. Each cable is pre-

terminated and tested to eliminate the potential for poor termination when

commissioned and any subsequent problems.

This cable may be required when connecting to HUB devices that do not

feature Auto MDX.

Pre-terminated Ethernet Cross Over Cat 5 Cable for Simple Commissioning

ETH-C5X Ethernet Cables

Page 1 of 1 Datasheet: 7953

The only controlled copy of this Data Sheet is the electronic read-only version located on the Cooper Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product

data and provide technical information that will help the end user with design applications. Cooper Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Cooper

Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.

0313 BU-SB13097