Find us at www.keysight.com Page 1
UXG Agile Signal Generator
N5193A and N5191A
1
Configure Your New UXG
This step-by-step process will help you configure your N5193A or N5191A UXG agile signal generator.
Tailor the performance to meet your requirements.
Included in Base Product N5193A UXG X-Series Agile Signal Generator
Standard options and accessories come with the UXG base model at no additional charge and do not
need to be ordered. They include:
•
10 kHz frequency resolution
•
100 µs switching speed (N5193A)
•
Amplitude range of +10 to -10 dBm
•
Phase noise of -117 dBc/Hz (typ) at 20 kHz offset for a 10 GHz carrier frequency
•
One day of on-site startup assistance
1
. The N5193A requires a United States EAR license. The N5191A is a modified version with
performance limited in certain parameters and does not require an export license. Notable
differences exist in areas such as frequency switching speed, chirp width, and maximum
frequency deviation. The N5191A is only compatible with the N5192A UXG vector adapter,
modified version.
Find us at www.keysight.com Page 2
Important note
When the N5194A UXG vector adapter is used with the N5193A UXG agile signal generator, the
N5193A must have options CC1 and SS4 installed.
Step 1. Select frequency range (required option; frequency range not upgradeable)
Description
Option number
Additional information
Frequency range from 10 MHz to 20 GHz
N5193A-520
Not compatible with Option 540
Includes standard adapter 3.5mm(f) to 3.5 mm(f)
Frequency range from 10 MHz to 40 GHz
N5193A-540
Not compatible with Option 520
Includes standard adapters 2.4mm(f) to 2.4 mm(f) and
2.4mm(f) to 2.9 mm(f)
Step 2. Choose frequency resolution
Description
Option number
Additional information
Frequency resolution 10 kHz
Standard
Frequency resolution 0.001 Hz
N5193A-FR1
The FR1 option is not required for fine frequency resolution if
the N5193A is being used as a local oscillator for an N5194A.
Step 3. Choose switching speed options
Description
Option number
Additional information
Switching speed 100 µs
Standard
N5193A: List update rate 100 µs
Switching speed 1 µs
N5193A-SS1
Update rate 1 µs; not compatible with Option SS4
Switching speed 180 ns
N5193A-SS4
Update rate 180 ns, not compatible with Option SS1
Step 4. Choose amplitude range
Description
Option number
Additional information
Amplitude range +10 to -10 dBm
Standard
Mechanical and solid-state attenuator
N5193A-AT2
80 dB agile range and 120 dB overall range