261v2-¼-SLOT Ion Nozzle

Product Code: A261V2-32-SLOT

Meech's Model 261v2-1/4-SLOT provides a

short blade of high-speed ionised air ideal for

sheet separation on the feed stacks of sheet-fed

printing presses.

Using the optional mounting bracket, this very

compact ioniser can be mounted in the busy

Optimisation of performance and extended ionisation range

Rapid decay times Very effective in high speed applications

Removable emitter pins

Easy to clean and replace. Minimum maintenance downtime and extended equipment

life.

Low air consumption Economical use of compressed air.

Small and compact Easy to locate and install in confined spaces

Technical Characteristics

Inlet 1/4" BSP Inlet

Outlet Slotted outlet

Emitter Pins Machined Titanium (7mm)

Decay Time 0.8 sec at 150mm at 30 Psi (2 bar) (1000V to 100V)

Ozone Less than 0.01 ppm

Input Voltage +/- 9kV DC Nominal

Ion Balance +/- 10V or better at set up

Page 1 Of 2

© Meech Static Eliminators Ltd 2019

Product shown in this document may be covered by one or more patents, patents applied for and/or registered designs and/or trade marks. For further information please refer to our Head Office or visit www.meech.com.

Page 2 Of 2

© Meech Static Eliminators Ltd 2019

Product shown in this document may be covered by one or more patents, patents applied for and/or registered designs and/or trade marks. For further information please refer to our Head Office or visit www.meech.com.