APPLICATION NOTE
© Copyright 2019 Ironwood Electronics
/
All rights reserved
/
Data subject to change without notice
Ironwood Electronics
/
1335 Eagandale Ct., Eagan, MN 55121 USA
+1.952.229.8200
/
info@ironwoodelectronics.com
/
www.ironwoodelectronics.com
Large Grypper PCB Support – App Note
1_17
700003-0019rA
Large Grypper PCB Support
The following show how important supporting the PCB for larger I/O Grypper application to ensure the device is
properly inserted into the Grypper Socket.
The above is a typical fixture. PCBs typically have components on the bottom side so standoffs are used to lift the board
above the components.
Bottom side of board at target area - Red outline
APPLICATION NOTE
© Copyright 2019 Ironwood Electronics
/
All rights reserved
/
Data subject to change without notice
Ironwood Electronics
/
1335 Eagandale Ct., Eagan, MN 55121 USA
+1.952.229.8200
/
info@ironwoodelectronics.com
/
www.ironwoodelectronics.com
Large Grypper PCB Support – App Note
1_17
700003-0019rA
Memory applications
The underside of the board is supported to hold the board up but there is typically no support under the target area
where the Grypper socket may be used. With no support, the board will easily flex.
Typically, there are areas within the target that can be supported.