PART NO. Z1-010-021, I0012602
Feb 2020
Windows 10 Compatibility
This software is compatible with Windows 10.
The following system configuration and VISA library (Ver. 5.5 in the case of KI-VISA) are required to use this product on
Windows 10.
For software installation, follow the respective instructions.
APPLICABLE APPLICATION
SYSTEM REQUIREMENTS
• Core i5 or higher
• Windows 10
• 8 GB RAM (Minimum)
• 20 GB or more of free hard-disk space
• A display that supports 1024 x 768 or higher resolution (96
DPI)
• CD-ROM drive
• Mouse
• RS232C, USB, or LAN (depending on the interface to use)
• VISA library
If you want to use the software continuously over an extended
period, expanding the RAM to 16 GB is recommend.
In case of using a USB serial converter for RS232C connection,
the software may not function properly.
VISA LIBRARY
To use this software, VISA library need to be installed on your
PC.
VISA (Virtual Instrument Software Architecture) library is a stan-
dard specification for measurement instrument connection soft-
ware, which was developed by VXIplug&play Sytems Alliance.
A KIKUSUI original KI-VISA is available that supports IVI VISA
specifications 5.0. If you want to use this software on Windows
10, download KI-VISA (Ver.5.5 or later) from the Kikusui
Electronics Corporation website download page (https://www.
kikusui.co.jp/en/download/).
The following other VISA libraries can also be used. Confirm
the license terms of each VISA library before installation.
• NI-VISA by National Instruments (Ver.19.0 or later)
• Keysight IO Libraries Suite (Ver.2019 or later) by Keysight
Technologies
If NI-VISA or Keysight IO Libraries Suite is already installed on
your PC, you do not need to install KI-VISA.
KIKUSUI ELECTRONICS CORP.
Phone: +81-45-482-6353
Facsimile: +81-45-482-6261
www.kikusui.co.jp/en/man/
• Wavy for PBZ
• PIA4800 Utilities
• SD002 BPChecker2000
• SD007-PFX BPChecker3000
• SD025-PMX
PART NO. Z1-002-642, IB00325A
Jun. 2013
BPChecker2000
Ver.3.1
USER’S MANUAL
PFX2000 Series
Application Software
SD002
INDEX 4
Hardware Configuration Concept 8
Software installation and
Hardware configuration 12
Test Condition Editor
Before entering the data of the
test conditions 23
Setting the Module 24
Enter the battery information 26
Setting the Protections 27
Settinn the Impedance
Measurement 30
Setting the Sequence 34
About Sequence Sheet 37
CC-CV Charge mode 38
CC Charge mode 39
Pulse Charge mode 40
The Setting Description for
the Charge Conditions 43
Predischarge 46
CC Discharge mode 47
CP Discharge mode 48
CC-Pulse Discharge mode 49
CP-Pulse Discharge mode 51
The Setting Descriptions for
the Discharge Conditions 53
Saving the test conditions file 55
Common Sequence Templete 56
Range of Test Condition Settings 58
Test Executive
Before executing test 65
Binding Channels to Groups 66
Assigning Test Conditions 67
Executing Tests 69
Resetting Alarms 78
Synchronized Testing with a
Temperature Chamber 80
Impedance Measurement 82
Alarms 90
Folders and Files 104
Graph Viewer
Before analyzing test results 109
Displaying Graphs 110