Page 1

www.sensata.com

| IAL/CEL/LEL SERIES

HYDRAULIC MAGNETIC CIRCUIT PROTECTORS

Introduction

Designed speciﬁcally for the 35mm symmetrical DIN rail, Airpax IALHR, IULHR and IELHR series Rail-Mount Magnetic circuit protectors offer the

advantages of quick and easy mounting or removal which results in efﬁcient and economical wiring, while conserving space.

These circuit protectors are available in 1, 2, 3 and 4 pole models, with a choice of handle colors with on/off and international I/O markings. These

protectors comply with UL and CSA standards and meet IEC and VDE spacing requirements. Typical applications include computers and peripherals,

telecommunications, medical equipment, machine tools and process control instrumentation. They provide the reliable performance associated with

magnetic circuit protection.

Mounting - These circuit protectors are designed to mount on standard

35mm DIN rails, such as 35x7.5 or 35x15 per DIN EN50022. Other

specialty rails are available from suppliers that provide a means of

mounting non DIN mount components by means of special captive jam

nuts.

SINGLE POLE, STANDARD STUD TERMINAL

Tolerance ± .015 [.38] unless noted.

Dimensions in brackets [ ] are millimeters.

www.sensata.com

Page 2

SPECIFICATIONS

Series Trip

The most popular conﬁguration for magnetic protectors is the series trip where the sensing coil and

contacts are in series with the load being protected. The handle position conveniently indicates circuit

status. In addition to providing conventional overcurrent protection, it’s simultaneously used as an on-off

switch.

Switch Only

In the event that over-current protection is not desired, the coil mechanism can be deleted, providing an

excellent low cost, single or multi-pole power switch.

Insulation Resistance

100 megohm minimum at 500Vdc between all electrically isolated terminals.

Dielectric Strength

3750Vac (3750V~) shall withstand AC voltages 50/60Hz for 60 seconds between all electrically isolated

terminals.

Endurance

Circuit breakers shall operate a minimum of 10,000 operations; 6,000 with rated current and voltage and

4,000 with no load.

Operating Temperature

–40°C to +85°C.

IEC 144 Classiﬁcation

Type handle spacings–IP40. Terminals–IP00.

.142 [3.6] DEEP (TYP.)

4 X 6-32 THREAD

M3 X 0.5-6H THREAD OPTIONAL

.748

[19.00]

.183

[4.65]

1.437

[36.50]

2.059

[52.30]

DIM.ìAî

1.240

[31.50]

1.417

[35.99]

.689

[17.50]

1.680

[42.67]

1.122

[28.50]

.689

[17.50]

2.500

[63.50]

.138

[3.51]

1.929

[49.00]

.236

[5.99]

3.622

[92.00]

USE TWO MOUNTING CLIPS

ALL MULTI-POLE CONFIGURATIONS

OFFO OFFO

II ON

Two Pole

MULTI-POLE DIMENSIONS - DIM “A”

1 pole .750 ± .02 [19.05 ± .5] max

2 pole 1.515 [38.48] max

3 pole 2.265 [57.53] max

4 pole 3.015 [76.58] max

Note: Dimension “A” varies with # of poles

LINE

LOAD

Series

Switch Only