Electrical Specifications
S6XX (Differential Output MEMS Oscillators)
Frequency Output
Frequency Stability
Operating Temperature Range
Supply Voltage
Item /Type
Features
l
l
l
l
l
3.2×2.5mm, 5.0×3.2mm, 7.0×5.0mm.
l Industrial and extended commercial temperature
ranges.
l Faster delivery.
l RoHS Compliant /Pb-Free.
l Applications: SONET, SATA, SAS, Fibre Channel,
Telecom, Network, Servers, Storage, and more.
Any frequency between 1MHz and 220MHz accurate to
6 decimal place.
LVDS and LVPECL output signaling types.
0.6ps RMS phase jitter (random) over 12kHz to 20MHz
bandwidth.
Frequency stability as low as ±10ppm.
Package size:
Http://www.q-crystal.com Mail: sjk@q-crystal.com Tel: 86-755-88352809 Fax: 86-755-88353718
MEMS Oscillators
High Performance Differential Output MEMS Oscillators
Rise /Fall Time
Output Differential Voltage Swing
1~220MHz
±10ppm, ±20ppm, ±25ppm, or specify±50ppm,
2.5V /3.3V
-20~+70ºC / -40~+85ºC
Input High Voltage
Input Low Voltage
Current Consumption
Resume Time
Output Type
70% VDD
30% VDD
10ms Max.
Input Pull-up Impedance 100 KΩ Typ.
Startup Time 10ms Max.
Duty Cycle 45~55%
OE Disable Supply Current
Output Disable Leakage Current
Standby Current
Maximum Output Current
Output Low Voltage
Output High Voltage
OE Enable /Disable Time
RMS Period Jitter
RMS Period Jitter (random)
Differential Output Voltage
VOD Magnitude Change
Offset Voltage
VOS Magnitude Change
Storage Temperature Range
LVPECL LVDS
69mA Max. 55mA Max.
35mA Max.
1µA Max.
100µA Max.
-
Vdd-1.1 ~ Vdd-0.7
Vdd-1.9 ~ Vdd-1.5
2.0V Max.
300ps Typ. 495ps Typ.
115ns Max.
1.7ps Max.
0.85ps Max.
450mV Max.
50mV Max.
1.375V Max.
50mV Max.
-
-
-
-
-
-
-
-65~+150ºC
30mA Max.
MEMS Oscillators
Low Power Programmable Oscillators
Http://www.q-crystal.com Mail: sjk@q-crystal.com Tel: 86-755-88352809 Fax: 86-755-88353718
[10] [11]
Package Size
Recommended Land Pattern
Dimensions
Dimensions
Units:mm
3.2±0.05
2.5±0.05
0.9
0.75±0.05
0.7
0.6
2.2 2.25
1.00
1.050.65
1.6
#3 #2 #1
#4 #5 #6
#1 #2 #3
#6 #5 #4
#3 #2 #1
#4 #5 #6
#1 #2 #3
#6 #5 #4
5.0±0.10
3.2±0.10
0.75±0.05
1.20
2.54
0.9
0.64
2.54
1.20
0.90
2.20
5.08
1.60
1.60
3.80
0.90±0.10
7.0±0.10
5.0±0.10
2.60
5.08
1.10
1.40
#3 #2 #1
#4 #5 #6
#1 #2 #3
#6 #5 #4
3.2×2.5×0.75 mm
5.0×3.2×0.75 mm
7.0×5.0×0.90 mm
Dimensions
Pin Description
Pin
Symbol
Function
NA
Output
Power
OE
ST
2
4
3
1
NC
OUT+
GND
No Connect; Leave it floating or connect to GND
for better heat dissipation.
Oscillator output
VDD Power Supply Ground
H or Open: specified frequency output.
L: Device goes to sleep mode.Supply current reduces to I_std.
H or Open: specified frequency output.
L: output is high impedance.
TOP VIEW
Output5 OUT- Complementary oscillator output
Power6 VDD Power supply voltage
Input
Input
1
2
34
5
6
OE/ST
NC
GND
OUT+
OUT-
VDD