> Description
The SR is a single output converter rated at 120W with peak capability of 150W. The
construction style is open frame PCB mounted on a aluminium plate for bulkhead fixing
or rack mounting. Compliant with Rail standards.
Special features include:
• Construction is low profile PCB
• Choice of mounting options—Bulkhead or Rack
• Wide input voltage range
> Input Specifications
The following input voltages versions are available as standard:
110Vdc (66.0—137.5V) dc (Suffix A)
83Vdc (48.0—96V) dc (Suffix G)
72Vdc (43.2—90.0V) dc (Suffix D)
52Vdc (31.2—65.0V) dc (Suffix C)
36Vdc (21.0—50.4V) dc (Suffix F)
24Vdc (16.8—33.6V) dc (Suffix B)
Other ranges are available to order
Parameter Detail
Input Ripple To EN50155
Input Protection Reverse polarity protection.
Surges and transients EN50155
Inrush Current Limited to typically 5 x nominal current (after 0.1ms)
Efficiency 75% to 85% dependant on voltage combinations
Input fuse Board mounted. Factory replacement only.
> Output Specifications
Parameter Detail
Maximum Output Power 120W nominal (150W peak power option)
Output Versions Single output only
Output Voltage Can be specified from 5V to 30V
Setting Tolerance +0.6% at 50% load, 15°C to 25°C
Minimum Load Zero for all outputs
Line Regulation + 0.2% all outputs
Load Regulation +
0.5% all outputs
Temperature Coefficient <0.02% / °C
Output Ripple <1% Pk-Pk of Output Voltage
Output Noise <1% Pk-Pk superimposed (up to 20MHz)
Response Time 0.5ms to within 2% (for a 20% - 90% load change)
Output Protection Output lines protected against indirect transients to
EN50155
Current limit Operates at approximately 105% of nominal or peak
load. Auto recovery.
Thermal Protection Shuts down PSU if safe internal temperature is
exceeded. Auto recovery.
Isolation Input to Output 3.0kV dc
Input to Case 1.5kV dc
Output to Case 1.5kV dc
Output to Output 0.5kV dc
>>> September 2010
120W POWERTRON
®
SR SERIES
DC/DC CONVERTER
www.martekpower.com