2 www.lemo.com

DISCLAIMER The information contained within this catalog and the functions offered are intended to provide information about products. All reasonable efforts have been made to ensure the accuracy of the

information. However, LEMO cannot be held responsible for any errors. LEMO does not warrant the accuracy and reserves the right to make changes to the catalog and its functions at any time without notice.

recision modular connectors to suit your application

ince it’s creation in Switzerland in 1946 the LEMO Group has been recognized as a global leader of circular Push-Pull con-

ectors and connector solutions. Today LEMO and its affiliated companies, REDEL and COELVER, are active in more than

0 countries with the help of over 40 subsidiaries and distributors.

Over 75’000 connectors

The modular design of the LEMO range provides over 75’000 connectors from miniature ø 3 mm to ø 50 mm, capable of han-

dling cable diameters up to 30 mm and for up to 114 contacts.

This vast portfolio enables you to select the ideal connector configuration to suit almost any specific requirement in most mar-

kets, including medical devices, test and measurement instruments, machinery, audio video broadcast, telecommunications

and military.

LEMO’s Push-Pull Self-Latching Connection System

The LEMO self-latching system allows the connector

to be mated by simply pushing the plug axially into

the socket.

This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute secu-

rity against vibration, shock or pull on the cable, and facilitates operation in a very limited space.

UL Recognition

LEMO connectors are recognized by the Underwriters Laboratories (UL). The approval of the complete system (LEMO

connector, cable and your equipment) will be easier because LEMO connectors are recognized.

CE marking

CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or

several European safety directives. CE marking applies to complete products or equipment, but not to electrome-

chanical components, such as connectors.

RoHS

LEMO connector specifications conforms the requirements of the RoHS directive (2011/65/EU) of the European Parliament

and the latest amendments. This directive specifies the restrictions of the use of hazardous substances in electrical and elec-

tronic equipment marketed in Europe.

Once firmly latched, connection cannot be broken by

pulling on the cable or any other component part other

than the outer release sleeve.

When required, the connector is disengaged by a

single axial pull on the outer release sleeve.

This first disengages the latches and then withdraws

the plug from the socket.