Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.
SERIES 7 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
198
2.25.01
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SERIES 7 VALVES AND SOLENOID VALVES
>
Series 7
valves and solenoid valves
VDMA 24563 (ISO 15407-1)
5/2 - 5/3-way CC CO CP
Size 26 mm (VDMA 24563-01)
Size 18 mm (VDMA 24563-02)
GENERAL DATA
Construction balanced spool type
Valve functions 5/2 - 5/3-way CC CO CP
Materials AL body, spool base, polyamide endcovers, NBR seals
Mounting by means of screws on the base
Ports on sub-base
Operating temperature 0° C min. +50° C max
Fluid filtered air (5 micron or less), without lubrication.
If lubricated air is used, it is recommended to use ISOVG32 oil. Once applied the lubrication should never be interrupted.
Size 26 mm
18 mm
Installation in any position
Operating pressure P. max 7 bar
Nominal pressure 6 bar
Nominal flow Qn Size 26 mm = 900 Nl/min
Qn Size 18 mm = 450 Nl/min
Voltage see coding
Voltage tolerance ± 10%
Power consumption 2W
Class of insulation class F
Protection IP54 (IP65 with connector DIN 40050)
Products designed for industrial applications.
General terms and conditions for sale are available on www.camozzi.com.
SERIES 7 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES
>
VALVES AND SOLENOID VALVES 2019
199
2.25.02
SERIES 7 VALVES AND SOLENOID VALVES
7
SERIES:
5
NUMBER OF WAYS - POSITIONS:
5 = 5/2
6 = 5/3 CC
7 = 5/3 CO
8 = 5/3 CP
1
SIZES:
1 = size 26 mm
2 = size 18 mm
N
SUBBASE:
N = sub-base with front outlets
1
PORTS:
1 = G1/4 (Size 26 mm)
2 = G1/8 (Size 18 mm)
A
NUMBER OF SUBBASES:
A = 1 *
B = 2 *
C = 3 *
D = 4 *
E = 5 *
F = 6 *
G = 7 *
H = 8 *
K = 9 *
L = 10 *
M = 11 *
N = 12 *
P = 13 *
R = 14 *
S = 15 *
P16
ACTUATION:
33 = pneumatic, bistable
36 = pneumatic, monostable
P11 = electro-pneumatic, bistable
P16 = electro-pneumatic, monostable
15
SOLENOID INTERFACE:
15 = 15x15
W
SOLENOID TYPES:
W = Series W (24V - 48V DC only)
P = Series P **
2
CONNECTION:
1 = wire 300 mm (Series W, 24V DC only) **
2 = 2 pins (Series W, 24V - 48V DC)
5 = 2 pins+earth (Series P) **
3
SOLENOID VOLTAGE:
3 = 24V DC
4 = 48V DC **
6 = 110V DC (with Series P solenoids only) **
B = 24V 50/60 Hz (with Series P solenoids only) **
C = 48V 50/60 Hz (with Series P solenoids only) **
D = 110V 50/60 Hz (with Series P solenoids only) **
NOTES:
* complete with the two end blocks
** on request
CODING EXAMPLE
7 5 1 - N 1 A - P16 - 15 - W 2 3