EX Cabinet Cooler
Product Code: A70025EX
The EX Cabinet Cooler is suitable for cooling
cabinet/panels in hazardous locations
The Meech EX Cabinet Cooler uses
compressed air to provide a cold air source that
stops industrial cabinets/panels or enclosures in
hazardous locations from overheating. The
Meech EX Cabinet Cooler is suitable for
installation in category 2 (Zone 1), T4 locations,
where ATEX or IECEx certification is required.
The Cabinet Cooler has no electrical/electronic
components making them entirely non-electrical.
The cooling is provided from a Vortex Tube
located inside the cooler. The Cabinet Cooler
creates both a hot and cold stream of air, the
cold air is directed inside the enclosure whilst
the hot air is released to the atmosphere via two
holes located in the side of the Cabinet Cooler.
The Cooler can be mounted to the directly to the
top, side or underneath of the enclosure via a
26mm diameter hole. An O-ring seal between
the Cabinet Cooler and the enclosure wall
maintains the integrity of the enclosure.
Features Benefits
EU Type Examination, Certification Number Baseefa16ATEX0042X
IECEx Certificate Number IECEx BAS 16.0087X
Product Classification Group II Category 2 Equipment
Maximum Inlet Air Pressure 80psi (5.5 Bar)
Maximum Inlet Air Temperature
55°C
Cold Fraction 70% (2.5 Turns from closed)
Report Number GB/BAS/ExTR16.0213/00
Temperature Classification T4
Technical Characteristics
Dimensions 222(L) x 45(W)
Included EX Cabinet Cooler unit, 4 x High Fraction Generators and 2.5m of Cooling Tube.
Noise Level 73dBA (@ 80psi (5.5 Bar)
Cooling Capacity 190 Watt (650 Btu/hr) to 703 Watt (2400 Btu/hr)
IP/Nema Rating IP56/Nema 4/12