Certificate
Number
Baseefa04ATEX0347X16
Issued 13
October
2017
Page 1
of
2
1
2
SUPPLEMENTARY
EU - TYPE EXAMINATION
CERTIFICATE
Equipment
or
Protective
System
Intended
for
use in
Potentially
Explosive
Atmospheres
Directive 2014/34/EU
3 Supplementary EU - Type
Examination Certificate Number:
Baseefa04ATEX0347X/6
3.1 In accordance with Article 41
of
Directive 2014/34/EU, EC-Type Examination Certificates referring to 94/9/EC that
were in existence prior to the date
of
application of2014/34/EU (20 April 2016) may be referenced as if they were
issued in accordance with Directive 2014/34/EU. Supplementary Certificates to such EC-Type Examination
Certificates, and new issues
of
such certificates, may continue to bear the original certificate number issued prior to
20 April 2016
4
5
6
Product:
Manufacturer:
Address:
MODEL
915 Ex
ELIMINATOR
BAR
Meech
Static
Eliminators
Limited
2
Network
Point,
Range
Road,
Witney,
Oxfordshire,
OX29
OYN
7 This supplementary certificate extends EC
- Type Examination Certificate No. Baseefa04ATEX0347X to apply to
products designed and constructed in accordance with the specification set out in the Schedule
of
the said certificate
but having
any
variations specified in the Schedule attached to this certificate and the documents therein referred to.
g SGS Baseefa, Notified Body number 1180, in accordance with Article 17
of
Directive 2014/34/EU
of
the European
Parliament
and
of
the Council, dated 26 February 2014, certifies that the product, as modified by this supplementary
certificate, has been found to comply with the Essential Health and Safety Requirements relating to the design and
construction
of
products intended for use in potentially explosive atmospheres given in Annex II to the Directive.
9 The marking
of
the equipment has changed from the original Certificate and shall include the following:
®
II
2 GD
EEx
m
lIB
T6 -20°C
~
Tamb
~
35°C
SGS Baseefa Customer Reference No. 1420
Project File No. 15/0659
This document is issued by the Company subject to its General Conditions for Certification Services accessible at http://www .sgs.com
/enn.enns
-and-
Conditions.aspx and the Supplementary Terms and Conditions accessible at http://www .sgs.com/SGSBaseefa/Term s-and -Conditions.aspx. Attention is drawn to
the limitation
of
liability, indemnification and jurisdiction issues defined therein. Any holder
of
this document is advised that information contained herein
reflects the Company 's findings at the time
of
its intervention only and within the limits
of
Client's instructions, if any. It does not necessarily indicate that the
equipment may be used in particular industries or circumstances. The
Company's
sole responsibility is to its Client and this document does not exonerate
parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full,
schedule included, without prior written approval of the Company. Any unauthorized alteration , forgery or falsification
of
the content or appearance
of
this
document is unlawful and offenders may be prosecuted to the fullest extent
of
the law.
SGS Baseefa
Limited
Rockhead Business Park, Staden Lane,
Buxton , Derbyshire SK17 9RZ
Telephone +44 (0) 1298 766600 Fax +44 (0) 1298 766601
e-mail baseefa@sgs.com web site www.sgs .co.uk/baseefa
Registered in England No. 4305578.
Registered address: Rossmore Business Park, Ellesmere Port , Cheshire, CH65 3EN
1t
R~~~
~lP04
TECHNICAL
MANAGER
On behalf
of
SOS Baseefa Limited
Certificate Number
Baseefa04ATEX034
7X16
Issued 13 October 2017
Page 2 of 2
13
14
Schedule
Certificate
Number
Baseefa04ATEX0347XJ6
15 Description of
the
variation
to the
Product
Variation
5.1
To allow the 915 Ex eliminator bar to be used in lIB gas atmospheres .
Variation
5.2
To update the nameplate marking to reflect the change
of
gas group.
16
Report
Number
15(C)0659
17 Specific
Conditions
of
Use
None additional to those listed previously
18 Essential
Health
and
Safety
Requirements
Compliance with the Essential Health and Safety Requirements is not affected by this variation.
19
Drawings
and
Documents
Number
DMEE0322
Sheet
Issue
6
Date
07/08/2017
Description
915Ex Atex Label