INDUSTRIAL THERMAL MANAGEMENT
DBK Group Further Information:
Industrial Thermal Management www.itm.dbk-group.com
Cartridge Heater with Metal Sheath
Description
Features
Design Characteristics
Cylindrical heating element for a wide field of applications.
Element can be used as:
• Radiation Heater
• Conductive Heater
• Heating Element for direct and indirect heating of fluids
• Soldered into screw head you get a complete heating element
that can be furnished with enclosure and control thus
providing a self-contained heating unit
• Controllable heat output by resistance wire technology
• Heating element embedded in ceramic body insulated from
sheath tube with magnesium oxide if required.
• Heat transfer by contact, radiation or convection
• Sheath diameter:
10; 12; 12,7; 15; 16; 17; 18; 20; 24; 28; 32 mm
• Sheath material brass, stainless steel
• Corrosion-proof if suitable material has been chosen
• Sheath temperatures brass up to 250°C,
stainless steel up to 600°C
• Connection on one side
• Heater connection formats available:
• nickel wire with glass-fibre reinforced tubing
maximum temperatures up to 250 C, length as desired
• bare nickel wire
• Nickel wire with glassfibre tube insulation
• sections with increased power output possible
• small cold zone
• Wattage and voltage as desired
• Cartridge bottom crimped, soldered or welded
• Mounting elements,
such as metal flange with
fastening bores, metal strap with fastening bores,
threaded flange with gasket possible
DBK 110113.
This information is subject to change without notice. Data is given for illustration purposes only and does not release the customer from independent application tests.
Cartridge Heater with Metal Sheath
INDUSTRIAL THERMAL MANAGEMENT
DBK Group Further Information:
Industrial Thermal Management www.itm.dbk-group.com
Design Characteristics
Applications
• Terminal enclosures of plastic-coated sheet steel
• Ø40 x 48 up to flange size G ¾“
• Ø80 x 97 up to flange size G 1½“ (control optional)
• Mounting: directly immersed in liquid,
in corresponding bore hole,
(bore diameter = tube diameter + 0,5 mm)
•
Baking Ovens
•
Heating of Oil, Water, Brine etc.
•
Tools
•
Heating Plates
•
Dies
•
Welding Tools
DBK 110113.
This information is subject to change without notice. Data is given for illustration purposes only and does not release the customer from independent application tests.
DBK’s knowledge of
thermal management
gives us the experience
to guide and support
you with your technical
challenges - we can
manage the complete
project from concept to
full production release.