C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number

20190409-E134514

Report Reference

E134514-20160330

Issue Date

2019-APRIL-09

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please

contact a local UL Customer Service Representative at http://ul.com/aboutul/locations/

Page 1 of 2

Issued to:

CYNERGY3 COMPONENTS LIMITED

Ferndown Industrial Estate

7 Cobham Rd Wimborne

BH21 7PE UNITED KINGDOM

This certificate confirms that

representative samples of

COMPONENT - SWITCHES, INDUSTRIAL CONTROL

SEE ADDENDUM PAGE FOR MODELS

Have been investigated by UL in accordance with the

component requirements in the Standard(s) indicated on

this Certificate. UL Recognized components are incomplete

in certain constructional features or restricted in

performance capabilities and are intended for installation in

complete equipment submitted for investigation to UL LLC.

Standard(s) for Safety:

UL508 and C22.2 No. 14-18 Standard for Industrial Control

Equipment

Additional Information:

See the UL Online Certifications Directory at

https://iq.ulprospector.com for additional information.

This Certificate of Compliance does not provide authorization to apply the UL Recognized Component Mark. Only

the UL Follow-Up Services Procedure provides authorization to apply the UL Mark.

Only those products bearing the UL Recognized Component Mark should be considered as being UL Certified

and covered under UL’s Follow-Up Services.

Look for the UL Recognized Component Mark on the product.

C E R T I F I C A T E O F C O M P L I A N C E

Certificate Number

20190409-E134514

Report Reference

E134514-20160330

Issue Date

2019-APRIL-09

Bruce Mahrenholz, Director North American Certification Program

UL LLC

Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please

contact a local UL Customer Service Representative at

http://ul.com/aboutul/locations/

Page 2 of 2

This is to certify that representative samples of the product as specified on this certificate were tested

according to the current UL requirements.

Models/Product

USR, CNR – Open type Switches – Reed Switch Models:

Series D - D followed by A, followed by R or T, followed by 7, followed by 05, 12 or 24, followed by 05,

75, 10 or 15, may be followed by F, P, S or T, maybe followed by up to 3 alphanumeric characters (Not

related to electrical ratings)

D followed by B, followed by R or T, followed by 7, followed by 05, 12 or 24, followed by 05, 75, 10 or

15, may be followed by F, P, S or T, maybe followed by up to 3 alphanumeric characters (Not related to

electrical ratings)

Series S2 – S2 followed by -03, -05,-12 or -24 followed P or E, maybe followed by up to 3 alphanumeric

characters (Not related to electrical ratings)

Series S8 – S8 followed by -05,-12 or -24 followed by 04 or 05, maybe followed by V, maybe followed

by up to 3 alphanumeric characters (Not related to electrical ratings)

Series S8–HR - S8 followed by -05,-12 or -24 followed by 04 or 05, maybe followed by V, followed by

HR, maybe followed by up to 3 alphanumeric characters (except ‘HR’, not related to electrical ratings)

Series S1 – S1 followed by -05,-12 or -24 followed by 04 or 05, maybe followed by D, DM or M, maybe

followed by up to 3 alphanumeric characters (not related to electrical ratings)

Series S1 (Form 2A and Form B): S1 followed by -05,-12 or -24 followed by -2A or -B, maybe

followed by D, DM or M, maybe followed by up to 3 alphanumeric characters (not related to electrical

ratings)

Series S – SAR9 followed by 05, 12 or 24 followed by 03 or 05 and may be followed by up to 3

alphanumeric characters (not safety related)

Series D1 – D1 followed by -05, -12 or -24, followed by C, may be followed by M, maybe followed by up

to 3 alphanumeric characters (not safety related).