215 Vineyard Court

Morgan Hill, CA 95037

Phone (408) 778-4200

FAX (408) 778-4300

Website: MarkiMicrowave.com

EQ Surface Mount Mixers

Marki Microwave EQ Carrier Surface Mount Mixers are designed for easy surface-mount

integration into microwave radio and other wireless systems for applications up to 40 GHz.

EQ Carrier Surface Mount components may be mounted one of two ways: reflow-soldered

directly to the system substrate or screwed in place and solder-tacked at the port and ground

connections. For many applications, it is sufficient to simply solder- tack the input/output and

ground connections. 0-80 metal or nylon screws may be used for alignment, although nylon

screws will minimize radiation effects.

For best performance, the surface mount mixer is reflow-soldered to the circuit board as

shown. The mounting holes can be used for alignment, however screws are not required.

See Application Note 601-03863 for the recommended PCB system footprint.

Application Note 601-03864 Sheet 1 of 1 11/17/08