SN3193
Dec. 2010 P0.1 SI-EN Technology
1
3-Channel Fun LED Driver
Description
SN3193 is a 3-channel fun LED driver which features
two-dimensional auto breathing mode. It has One Shot
Programming mode and PWM Control mode for RGB
lighting effects. The maximum output current can be
adjusted in 5 levels (5mA~42mA).
In PWM Control mode, the PWM duty cycle of each
output can be independently programmed and controlled
in 256 steps to simplify color mixing. In One Shot
Programming mode, the timing characteristics for output
current - current rising, holding, falling and off time, can
be adjusted individually so that each output can
independently maintain a pre-established pattern
achieving mixing color breathing or a single color
breathing without requiring any additional interface
activity, thus saving valuable system resources.
SN3193 is available in DFN-10 (3mm × 3mm). It
operates from 2.7V to 5.5V over the temperature range of
-40°C to +85°C.
Features
z One group RGB, single color LED breathing
system-free pre-established pattern
z 3 independently controlled automatic and
semiautomatic breathing system-free pre-established
pattern
z I2C interface, automatic address increment function
z 3 independently controlled outputs of 256 PWM
steps
z 2.7V to 5.5V supply voltage
z 5 levels programmable output current
z Over-temperature protection
z Operating temperature T
A
= 40°C ~ 85°C
z DFN-10 (3mm × 3mm) package
Applications
z Mobile phones and other hand-held devices for LED
display
z LED in home appliances
Typical Application Circuit
Figure 1 Typical Application Circuit
SN3193
Dec. 2010 P0.1 SI-EN Technology
2
Pin Configuration
Package Pin Configuration (Top View)
DFN-10
Pin Description
No. Pin I/O Description
1 SDB I Shutdown the chip when pulled to low.
2 VDD - Power supply.
3~5 OUT1~OUT3 O Current source outputs.
6 GND - Ground.
7 AD I I2C address setting.
8 SCL I I2C serial clock.
9 SDA I/O I2C serial data.
10 V_BM O Breathing mark signal output.
Thermal Pad - Connect to GND
Ordering Information
Order Number Package Type QTY/Reel Operating Temperature Range
SN3193I310E DFN-10 2500 -40°C ~ +85°C
SN3193
Environmental Code
E: Lead Free
Pin Code
10:10 pins
Package Type
3: DFN, 3mm × 3mm
Temperature Code
I: Industrial, -40°C ~ +85°C