CT300 August 2019
© 2019 Crocus Technology 1
CT300 · Rev. 0.9
CT300
2D Angular Sensor
• Angular Error as low as 0.6° Over Full Temperature
Range
• Dual Full-Bridge Resistor Network
• Operating Magnetic Field: 20 mT to 80 mT
• Differential Outputs for SIN and COS Axes
• Supply Voltage: 1.0 V to 5.5 V
• Package Options:
o 8-lead TSSOP
o 8-lead DFN, 2.00 × 2.00 × 0.45 mm
o KGD (Known Good Die) in Wafer Form
The CT300 is a 2D angular sensor in a dual full-bridge
configuration
from Crocus Technology developed on its
patented MLU™ technology. The operating magnetic field
for this 2D sensor is 20 mT to 80 mT and has an angular
error as low as 0.6° after compensation
operating temperature range. For applications where the
angular error requirements are not as stringent, a 1.0°
variant is available as well. It has differential outputs for
both sine (SIN) and cosine (COS) axes and operates with
a supply voltage range from 1.0 V to 5.5 V.
It is packaged in an 8-
lead TSSOP package and for
applications where space is critical, a low profile, small form
factor 8-lead DFN package that is 2.00 × 2.00 × 0.45 mm in
size. The CT300 is also made available in die form where
it will be shipped as unsawn wafers (wafer map files will be
provided to indicate known good die).
• Angular Measurements
• Rotary and Angular Sensors
• BLDC Motors
Ordering Information
Part Number
Operating
Temperature Range
Angular
Error
(1)
Output Type Package
Packing
Method
0.6° Differential
8-lead TSSOP
6.40 x 3.05 x 1.10 mm
Tape & Reel
0.6° Differential
8-lead DFN
2.00 x 2.00 x 0.45 mm
Tape & Reel
(1) After Compensation (includes offset cancellation and amplitude normalization).