dPYExxxx ezPyro SMD Evaluation Kits Rev. 4.0
Please note: the information contained in this document is subject to change without further notification. Pyreos reserves the right to alter the performance and any resulting
specification. Pyreos may choose not to supply any engineering sample devices as a commercial product. No responsibility is accepted for any consequential loss incurred.
Pyreos Ltd, SMC, Alexander Crum Brown Road, Edinburgh EH9 3FF, UK. Tel: +44 131 650 7009, www.pyreos.com © 2018 Pyreos Ltd.
ezPyro
TM
SMD Evaluation Kits
The ezPyro application specific evaluation kits demonstrate the capabilities of Pyreos’ innovative ezPyro
digital infrared sensors. The evaluation kits consist of a main board with up to 4 ezPyro sensors and an
attached controller board based on an ARM Cortex-M4 microcontroller. There are specific kits for gas,
flame, motion and gesture sensing, as well as a generic kit allowing various ezPyro sensors to be plugged
into a backplane board.
ezPyro evaluation kits can be connected to PC’s over a micro-USB port, that can also be used to power.
Supplied software enables the users to configure the sensors, visualize and record sensor signals and use
basic application specific demo algorithms.
Application
Kit number
Sensor included
Sensor description
Remarks
Flame detection
dPYEFL01
ePY12111
ePY12211
ePY12241
ePY12251
1x1p – 5.00 µm LWP
1x1p – 3.91 µm / 90 nm
1x1p – 4.64 µm / 180 nm
1x1p – 4.48 µm / 620 nm
Human motion rejection
General rejection channel
Flame detection
Flame detection
CO
2
Gas sensing
dPYEGA01
ePY12211
ePY12231
1x1p – 3.91 µm / 90 nm
1x1p – 4.26 µm / 180 nm
Reference channel
CO
2
Motion detection
dPYEMO01
ePY22111
1x1p – 5.00 µm LWP
Motion sensing
dPYEMO02
ePY22114
2x2p – 5.00 µm LWP
Motion & motion direction sensing
Gesture detection
dPYEGE01
ePY22114
2x2p – 5.00 µm LWP
Large aperture – Long range – With Fresnel lens
dPYEGE02
ePY21114
2x2p – 5.00 µm LWP
Small aperture – Medium range – No optics
Breakout Boards
and Backplane
dPYEBB01
(base board)
Sold separately:
Up to 4 Breakout
boards
(ePYxxxxx-B1)
Depends on the breakout
boards ordered
Maximum flexibility in evaluation of ezPyro sensor
products.
Rigid or flexible connection for easy prototyping
Out-of-the box sensor readout tools
For more information contact sales@pyreos.com