Part number
CX 03 P
Brief description:
for pneumatic contacts (without contacts, to be ordered separately), 1 module,
modular units for pneumatic contacts
Product description
Version for pneumatic contacts
Style 3 housings for tube Ø 1.6 ÷ 4.0
Family MIXO series, customizable inserts
Size 1 module
Technical data
Operating temperature
range (min, max)
-40°C ... +80°C
Further technical details
Insulation resistance ≥ 10 GΩ
Rated voltage according to
UL/CSA
600V
Weight 6,00 g
Approvals / Standards
Quality mark
, EAC
Conformity Not applicable
General ordering information
EAN13 code 8015747041744
Packaging Information
Packaging length 180,00 mm
Packaging height 130,00 mm
Packaging width 150,00 mm
Packaging weight 0,53 kg
Packaging volume 3,51 dm³
Packaging description Carton box
Packaging quantity 60 Pcs
Packaging EAN code 8015747221269
Sub-packaging length 35,00 mm
Sub-packaging height 40,00 mm
Sub-packaging width 155,00 mm
Sub-packaging weight 0,09 kg
Sub-packaging volume 0,22 dm³
Sub-packaging description Carton tray
Sub-packaging quantity 10 Pcs
Sub-packaging EAN
barcode
8015747041751
Part number
CX 03 P
Catalogue drawings
Notes
the modular inserts must be installed in suitable frames which in
turn are installed in traditional housings or COB panel support
Warnings:
1) Please note that the VDE-Directives do not allow the
combination of electrical and liquid connectionswithin the same
connector for clear safety reasons.
2) CRM/F CX code pins and guides must be used forpneumatic
contacts modules.
These pins also provide coding if pneumatic contacts modules are
used exclusively.
Use of units for pneumatic contacts
- identical male and female modular units
- pneumatic contacts for pressure values up to 8 bar,for use with
clean and dry compressed air
- contacts for gas and liquids on request (see warning)
- use of tubes with Ø 1.6 - 3 - 4 and 6 mm, and possible
replacement of tubes with assembled units
- possibility of using tubes with different diameters in the same
modular unit
- female contacts with or without closing valve
- working temperature range - 40 °C ÷ + 80 °C