BRACKET
KRB9/ KRB400-PCR-LE
Part No. Z9-000-441, IA004861
2. As shown in figure, using the accompanying screws, install the brackets.
Be sure to use the accompanying screws (M4 x 10).
No. CODE
Accessories
DESCRIPTION QTY.
1 B9-000-174 BRKT KRB9 L/R (for KRB9)
1 B9-000-175 BRKT KRB400 L/R (for KRB400-PCR-LE)
2
2
2 M2-101-016 FLH SCREW S-NI M4x0.7x10 8
3 M2-102-002 OVH SCREW S-NI M5x0.8x14 8
4 M5-003-031 CUP WASHER 5 CW 8
1
1
2
2
3. Using the accompanying screws and washers, mount the instrument in the rack.
Be sure to use the accompanying screws (M5 x 14) and washers.
3
3
4
4
Install the brackets to the instrument in the next procedure and build in it to the rack.
1. Remove the feet of the instrument. To remove the feet, follow the procedure in
the operation manual of the instrument.
The KRB9 is the bracket for EIA standard rack (inch). The KRB400-PCR-LE is the bracket
for JIS standard rack (milli).
Example: KRB9
Example: KRB9
The instrument may fall.
Install the suitable support angles
applying to the used rack system to
support the instrument.
Support angle
Instrument
CAUTION
KIKUSUI ELECTRONICS CORP.
1-1-3, Higashiyamata, Tsuzuki-ku, Yokohama, 244-0023, Japan