BRACKET
KRB6
Install the brackets to the instrument in the next procedure and build in it to the rack.
2. As shown in figure, using the accompanying screws, install the brackets.
Do not use except the accompanying screws (M4 x 10 flat head screws).
3. Using the accompanying screws and washers, mount the instrument in the rack.
KIKUSUI ELECTRONICS CORP.
1-1-3, Higashiyamata, Tsuzuki-ku, Yokohama, 244-0023, Japan
No. CODE DESCRIPTION QTY
1 B9-000-028 BRKT KRB6-PAM L/R 2
2 M2-101-016 FLH SCREW S-NI M4X0.7X10 8
3 M2-102-002 OVH SCREW S-NI M5X0.8X14 8
4 M5-003-031 CUP WASHER 5 CW 8
1
1
2
2
3
4
The instrument may fall.
Install the suita
ble support angles
applying to the used
rack system to
suppo
rt the instrument.
Support angle
Instrument
CAUTION
Part No. Z1-901-180, IA002734
1. Remove the feet of the instrument. To remove the feet, follow the procedure in
the operation manual of the instrument.