| 1 |
ASL10S – Steplights 10" Square
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 2.15
TYPE
• A complete range of steplights designed for
elegance in harsh environments
• Available with energy efficient LED
• Brass fascias, glass lenses and composite housings
make these steplights impervious to the elements
• Reflector module is spun, anodized aluminum parabolic
reflector with a snap on lamp shield
• Powder coat finish in thirteen standard colors with a
polymer primer sealer
1. LUMINAIRE
ASL10 -S Q -F R (Frosted lens)
ASL10 -S Q -LS (Linear spread lens)
ASL10-SQ-CROSS-FR (Cross with frosted lens)
ASL10-SQ-CROSS-LS (Cross with linear spread lens)
ASL10-SQ-EYE (Eyelid)
SPECIFICATIONS
HOUSING
The housing shall be one piece, molded from
fiberglass impregnated, U.L. listed, sheet molding
compound. The housing shall have threaded
brass inserts molded into the housing to attach
the cover assembly. The housing shall include a
removable aluminum mounting strap to secure
the housing to the structure. The semi recessed
and surface mounted fixtures (round style only)
shall have an extruded aluminum outer shell, and
include a cast aluminum back plate.
All internal and external hardware shall be
stainless steel. The cover assembly shall consist
of a die cast aluminum (or brass) frame and inner
ring assembly. The cover assembly shall fully
seal the housing with a molded silicone gasket.
The inner fascia ring shall be rotatable to insure
horizontal alignment independent of the housing.
Four captive stainless steel fasteners are loosened
to access the lamp and ballast assembly. The lens
shall be tempered glass, frosted or with a molded
linear refractor pattern. The outer sleeve for the
surface (SURF), and semi recessed (SEMI) model
option is extruded aluminum with a cast aluminum
back plate. The standard housing is attached to
the sleeve with four stainless steel screws. The
assembly is then secured to the back plate with
four stainless steel set screws.
For non-IC rated fixtures, fixtures must be 3" away
from insulation in open walls.
OPTICAL ASSEMBLY
The ASL10 reflector module shall be composed of
faceted, semi specular anodized aluminum panels
rigidly attached to an aluminum tray. The reflector
shall have an integral lamp shield. The reflector
module shall fasten to the housing and have a five
degree rotational compensation adjustment to
align the lamp.
ASL10 S
4. OPTIONS
FS1 (Single Fuse Holder)
FS2 (Double Fuse Holder)
347 (120/227/347 volt ballast. Available for the 70MH,
100MH, 70 HPS and 100HPS only)
GLOW (Cast acrylic ring with a frosted finish. Adds a soft backlit
glow around the perimeter of the fascia. Increases the projection of
the fascia by .50"(13mm). For standard flush mount.
Recessed back box only)
BSA (Housing ahead option back box with strap only for standard
flush mounting)
MOUNTING
LAMP/BALLAST RECESSED SEMI SURF RBX GLOW
CF max. 26 W * * * 26 W
MH max. 70 W * * * 70 W
HPS max. 70 W * * * 70 W
LED 15 W * * * 15 W
See next page
JOB
TYPE
NOTES
AS L10 -S Q - F R
Frosted lens
AS L10 -S Q - LS
Linear spread lens
ASL10-SQ -CROSS -FR
Frosted lens
ASL10-SQ-CROSS-LS
Linear spread lens
AS L10 -S Q - E Y E
Eyelid
Frosted Cross Eyelid
FASCIA DESIGNS
* Mounting option is not available.
Note: The above chart reflects wattage limitations when installed in
concrete.
2. LAMP/BALLAST
LED (9LED array (15 watts). Warm white (3500K), Bright white (5100K).
120 thru 277 volt)
9LED-WW 9LED-BW
COMPACT FLUORESCENT (120 thru 277 volt. )
CF (For 26 and 32 watt 4-pin compact fluorescent lamp)
METAL HALIDE
Medium base, ED-17 lamp
50MH (120/208/240/277 volt)
70MH (120/208/240/277 volt)
100MH (120/208/240/277 volt)
G12 base, T-6 ceramic lamp
70MHT6 (120/277 volt)
HIGH PRESSURE SODIUM
Medium base, ED-17 lamp
50HPS (120/277 volt) 70HPS (120/208/240/277 volt)
100HPS (120/208/240/277 volt)
All ballasts are factory wired for 277 volts, unless specified. Lamps not
included (except LED)
1. LUMINAIRE 2. LAMP/BALLAST 3. COLOR 4. OPTIONS
3. COLOR
WH Arctic White
BL Black
BLT Matte Black
DB Dark Bronze
DGN Dark Green
TT Titanium
WDB Weathered Bronze
MDB Bronze Metallic
VBU Verde Blue
CRT Corten
MAL Matte Aluminum
MG Medium Grey
AGN Antique Green
LG Light Grey
RAL Premium Color
CUSTOM * * Contact Factory
BRASS Cast brass fascia (for recessed mount only)
| 2 |
ASL10S – Steplights 10" Square
ARCHITECTURAL AREA LIGHTING
16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.aal.net
Copyright © 2012 | Rev 2.15
TYPE
ELECTRICAL
The ballast shall be mounted on a prewired tray with a
quick disconnect plug and removed by pulling out of the
housing. The HID ballasts are high power factor, rated
for -30°C starting. Sockets are medium base, pulse rated
porcelain. The compact fluorescent model shall have a
GX24q-3 socket for a 26 and 32 watt 4 pin lamp, and an
electronic ballast, -5°F starting. Ballasts are multi-tap, wired
at the factory for 277 volts. The ASL10 shall use a 9LED
module (15 watt) for 120 thru 277 volt input.
FINISH
The cast aluminum fascia finish consists of a five stage
pretreatment regimen with a polymer primer sealer, oven
dry off, and top coated with a thermoset super TGIC
powder coat finish. The finish shall meet the AAMA 605.2
performance specification which includes passing a 3000
hour salt spray test for corrosion resistance. Cast brass
face plates shall be supplied in a natural, unfinished state
to develop a patina.
CERTIFICATION
The fixture is listed with ETL for outdoor, wet location use,
UL1598 and Canadian CSA Std. C22.2 no250.
WARRANTY / TERMS AND CONDITIONS OF SALE
Download:
http://www.hubbelllighting.com/resources/warranty/
AAL reserves the right to change product specifications without notice
.
IES files can be found at www.aal.net
DIMENSIONS
9.3 in
8.50''
216mm
10.2''
259mm
6.10''
155mm
9.20''
235mm
4.0''
100mm
.54'' / 13.7 mm
AS L10 -S Q
DIMENSIONS:
10.5"/267mm square
PROJECTION FROM WALL:
Plain and cross: 1.31”/33mm
Eyelid: 2.75”/70mm
BACK BOX STRAP:
1.50"/38mm x 13"/330mm
2 conduit holes on opposite
sides .92"/23mm diameter
9.3 in
8.50''
216mm
10.2''
259mm
6.10''
155mm
9.20''
235mm
4.0''
100mm
.54'' / 13.7 mm
6.4 in
8.50“
216mm
7.7 in
10.2“
259mm
4.5 in
6.10“
155mm
ASL10S LS LED WATTAGE: 12.7 LUMEN OUTPUT: 65 EFFICACY: 5.1
ASL10S FR 50MH WATTAGE: 95 LUMEN OUTPUT: 644 EFFICACY: 35.8
UPLIGHT 49.8%
DOWNLIGHT 50.2%
UPLIGHT 30.2%
DOWNLIGHT 69.8%
ZONE LUMENS %LAMP %LUMINAIRE
0 - 30 23
0.7%
3.6
%
0 - 40 55
1.6% 8.6%
0 - 60 172
5.1%
26.7
%
60 - 90 278
8.2% 43.1%
0 - 90
450
13.2%
69.8
%
90 - 180 195
5.7%
30.2
%
0 - 180 644
18.9%
100
%