PART NO. Z1-005-550, IA004953
Jan. 2017
400W Type 800W Type 1600W Type
PWR400L PWR800L PWR1600L
PWR400M PWR800M PWR1600M
PWR400H PWR800H PWR1600H
Setup Guide
Regulated DC Power Supply PWR Series
Thank you for purchasing the PWR regulated DC power supply se-
ries.
The PWR Series are constant voltage/current automatic crossover
power supplies that are capable of delivering voltages and currents
in a wide operating range within the rated output power.
Features
• Power-factor improvement circuit
The power-factor improvement circuit reduces the effects of har-
monic currents on the power line.
• High efficiency
The high power conversion efficiency reduces the cost of power
and the cost of heat radiation design during system configura-
tion.
• Communication functions
Equipped with a digital remote control function through TP-BUS
(Twist Pair-BUS) communication (The total length of TP-BUS is
200 m). By combining with Kikusui’s PIA4800 Series Power Sup-
ply Controller, systemization for applications such as an auto-
matic tester is possible.
• Master-slave operation
Output voltage or output current can be expanded by connect-
ing multiple power supplies of the same model in series (only
on the L type) or in parallel. This feature allows slave units to be
controlled from a single master unit.
KIKUSUI ELECTRONICS CORP.
1-1-3, Higashiyamata, Tsuzuki-ku, Yokohama, 224-0023, Japan
TEL: +81-45-593-0200 Fax: +81-45-593-7571
The contents of this manual may not be reproduced, in whole or in part, without the
prior consent of the copyright holder.
The specifications of this product and the contents of this manual are subject to
change without prior notice.
WEBSITE
http://www.kikusui.co.jp/en
The newest version of the PWR manual can be downloaded
from Download service of Kikusui website.
© 2012
2 PWR Series Setup Guide
Checking the Package Contents
When you receive the product, check that all accessories are included and that the accessories have not been damaged during transporta-
tion. If any of the accessories are damaged or missing, contact your Kikusui agent or distributor. The power cord varies depending on the type.
Accessories
M3 sensing terminal screws
M3 screws for chassis connection wire
2 pcs.
[M3-112-012]
J1protection socket
1 pc.
[84-49-0110]
J1 lock lever
1 pc.
[83-06-5060]
Plug：NEMA5-15
Rating：125Vac/10A
[85-AA-0003]
Plug：NEMA5-15
Rating：125Vac/10A
[85-10-0740]
Pulg: CEE7/7
Rating: 250Vac/10A
[85-10-1070]
Pulg: GB1002
Rating: 250Vac/10A
[85-10-0790]
or
or
1 pc. [M3-112-012]
1 pc. [M3-112-015]
CD-ROM (1 pc.)
Setup Guide (This guide, 1 pc.) Quick Reference
English 1 pc. , Japanese 1 pc
.
Safety information (1 pc.)
Power cord for the 400W/800W type
Power cord for the 1600W type (with cable clamp and no plug)
M8 output terminal screws
2 sets
M4 output terminal screws
2 pcs.
[M3-112-026]
OUTPUT terminal cover
TP-BUS connector
1 pc.
[84-61-5102]
[M1-100-011]
[M5-101-007]
[M4-100-007]
1 set
[Q1-500-077]
Cable clamp: [P1-000-055] 1 pc.
Fastening plate: [D6-750-001] 1 pc.
Cable: [85-10-1010] 1 pc.
EMI core: [96-01-0180] 1 pc.
Accompanying screws B: [M3-112-017] 2 pcs.
Accompanying screws A: [M3-112-015] 2 pcs.
Accompanying nuts: [M8-500-003] 2 pcs.
The power cord that is provided varies depending on
the destination for the product at the factory-shipment.
These parts are installed in body.
or