BPC3000 V2 Update Manual (G1B65208)
KIKUSUI ELECTRONICS CORP.
1/18
SD007-PFX (BPChecker3000) Ver. 2 Update Manual
This manual describes the procedures for installing an update module that you have downloaded from
the Kikusui website into a PC and PFX25x2.
The version number indicated in this manual may not be the latest version. Replace it with the latest
version number that you have in hand as you read this manual.
The following notes apply if you are updating version 1 to version 2.
1. When you're using Ver1.0.0.0-Ver1.4.9.0, this update is applied. For a custom-made product,
Ver1.5.0.0.-Ver1.9.9.9 can't use this update.
2. As a result of functional additions in version 2, the test condition file was changed from the data format used
in version 1.
When a test condition file created with version 1 is opened with version 2, the data is automatically updated
for version 2.
As such, new test conditions created with version 2 and test conditions created with version 1 that have
been opened and saved with version 2 cannot be used with version 1. We recommend that you back up test
conditions created with version 1 in a separate folder or the like.
3. Version 2 is designed so that test conditions acquired with version 1 can be viewed with Graphviewer of
version 2, but problems may occur depending on the content of test data, the PC performance, and so on.
If a problem occurs such as not being able to open test conditions of version 1 after updating to version 2, it
is possible to revert temporarily to version 1. See “Reverting Back to the Old Version” (chapter 7).
4. Version 2 does not support Windows XP or Windows 10.
5. The software environmental settings (graph axis, color, etc.) are passed on from version 1, but some settings
may be reset to default values.
1. Preparation
1-1 Preparation 1
Check the following items before starting installation.
Check that SD007-PFX BPChecker3000 is installed.
Check that none of the following SD007-PFX BPChecker3000 component applications are
running.
IO Config
Test Condition Editor
Test Executive
Graph Viewer
If any of the applications are running, close them before proceeding further.
Jul 6, 2018
Please read before updating.
BPC3000 V2 Update Manual (G1B65208)
KIKUSUI ELECTRONICS CORP.
2/18
Check that the PFX25x2 (hardware) is connected to the PC and communication can be
performed normally.
(The LAN connection can be through either a fixed IP or DHCP.)
1-2 Preparation 2
Obtaining the update module
Access the Kikusui website (http://www.kikusui.co.jp/).
From the DOWLOAD page,
under “Instruments Drivers/ Updaters/ Application (Free),”
click SD007-PFX BPChecker3000 > Application Updata.
When the download page appears, download the following update module.
B3k_update_2_x_x_xxR.zip
Click Extract.
Unzip the downloaded zip file.
The left figure shows an example for Explorer.
Select the zip file, right-click to display a shortcut
menu.
Click Extract
A
ll.