LANmark-OF ENSPACE Patch Panels
LANmark-OF ENSPACE UHD Patch Panel 1U 12x Modules Black
联系
综合布线系统
电话: +86 (0)21 3335 9400
info.ncsapac@nexans.com
耐克森技术或商业文件中所包含的产品图纸、设计、规格、计划,特别是产品的重量、规格和尺寸,仅仅是对产品做一般性描述,不应对耐克森具有约束力,也
不应被当做构成耐克森对产品的陈述。
Generated 19-11-9 www.nexans.cn 页码 1 / 2
耐克森产品编号: NSPACE.PP1U
Optical patch panel with Ultra High Density: up to 144 LCs or 72 MTPs in a
rack unit
•
Up to 12 ENSPACE modules in 1U
•
3 individually sliding trays for maximum flexibility during operation and
installation
•
Patch cord management for each individual tray
•
Labelling front for port identification
•
Sliding and tilting tray at the rear of the panel for better access to
cables during initial installation and additions
•
Optimised for installation of ENSPACE Pre-Term with cable glands
•
产品描述
The Nexans' ENSPACE concept is designed for data centres where the high
density, integrated patch cord guides and enhanced installation benefits of
the ENSPACE patch panel meet the key requirements for implementation. It
allows quick changes with limited down time, easy migration to other
applications and a transition path to 40G/100G.
The LANmark-OF ENSPACE system consists of 3 sub-components: Pre-Terms,
modules and patch panels.
The Nexans’ unique ENSPACE 1U panel design has 3 sliding trays. Each tray
can have up to 4 ENSPACE modules. The panel can accommodate up to 12 modules
allowing 144 LC connections when modules with LC adaptors are used. With
LANmark-OF ENSPACE MTP adaptor modules 72 MTP connections within 1U can be
installed. ENSPACE modules need to be ordered separately.
The newly developed tray slides have 3 locking positions.
The operational position when the trays are completely in the rack.
•
The patching position when the tray is moved forward by 75 mm. This allows
easy access to the patch cords.
•
The installation position when the tray is almost completely out of the
rack. This allows installation of the ENSPACE modules from the front with
access to the rear of the ENSPACE module.
•
In addition the tray can slide completely to the back of the panel. In that
position access to the modules is further enhanced for insertion and
removal. The Pre-Terms can be connected more easily to the ENSPACE
modules.
The sliding trays have printed letters to identify the individual trays.
Additional side grips on the left and right enhance the pulling forward of
the tray.
The LANmark-OF ENSPACE Pre-Terms are fixed on a separate, sliding and
tilting tray in the rear of the panel. For installation of the cables the
tray can be slid out of the patch panel by about 15 cm. This allows easy
access to the fixing points for the cables without being in the small space
formed by the panel above and underneath in a high density rack. On this
tray 2 cable fixing kits can be mounted. Each kit has 3 slots for the
installation of cables. The slots are suitable for a PG-13 cable gland. The
orientation of the fixing kit can be modified to allow for side, angled or
rear entry. An optional third cable fixing kit can be installed on the tray
as well.