Z8FMC16100 Series Motor Control Development Kit
Quick Start Guide
QS002810-0111 Page 2 of 12
• eZ8™ CPU User Manual
• Product Specification
��Product Brief
System Requirements
Table 1 lists the system requirements for running ZDS II.
Configuring the Power Supply
The universal power supply kit features four different plug adapters in one box and the
power supply itself in another. The power supply ships with a slide-out plate which must
be removed to insert the location-specific plug adapter.
Observe the following steps to install a location-specific adapter plug:
1. Remove the slide-out plate.
2. Select the appropriate AC plug adapter and insert it into the slot that remains after re-
moving the slide-out plate.
3. Slide the new plug adapter into the slot until it snaps into place.
Table 1. ZDS II System Requirements
Recommended Configuration Minimum Configuration
• Windows XP Professional SP3 or later
• Pentium IV 2.2GHz processor or Higher
• 1024MB RAM or Higher
• 135 MB hard disk space (i ncludes
Application and Do cumentation)
• Super VGA Video Adapter
• CD-ROM for installation
• USB High-Speed port (when using USB
Smart Cable)
• Ethernet port (when using Ethernet
Smart Cable)
• RS232 communicatio n port with
hardware flow control
• Internet browser (Internet Explorer or
Netscape)
• Windows XP Professional
• Pentium IV 1.2GHZ processor
• 512 MB RAM
• 50 MB hard disk space (only includes
Application)
• Super VGA Video Adapter
• CD-ROM for installation
• USB Full-Speed port (when using USB
Smart Cable)
• RS232 communication port with
hardware flow control
• Internet browser (Internet Explorer or
Netscape)