121213 / BR Page 1 / 2
Resinates .
RP AU 060209-20% H
Gold Resinate Paste
/ DPIS*
* Development Product Information Sheet
Description
RP AU 060209-20% H is a thin film conductor paste for use
on alumina and glazed alumina. RP 060209-20% contains
gold and a small amount of non-precious metals in form of
soluble organo-metallic compounds. After firing a conducting
gold film is obtained. To reach higher film thicknesses it is
necessary to print several layers on top of each other. Each
applied layer has to be fired separately.
Key Benefits
• Due to simultaneous sintering of non-precious metal
oxides RP 060209-20% offers a high adhesion on
above mentioned substrates.
• Free of lead, cadmium and nickel
• Free of phthalate
• REACH
3
and RoHS
4
compliant
Processing
1. Spatulate well prior to processing. When stored in a
refrigerator allow paste to come to room temperature prior
to opening, to avoid condensation.
2. Print through a 300 - 350 mesh stainless steel screen with
an emulsion thickness of 15 - 20 µm.
3. Let the print settle at room temperature for 10 minutes.
4. Dry at 90 °C for 15 minutes. Do not exceed peak of 130
°C.
5. Fire at 850 °C (peak) for 7 - 10 minutes and with a total
firing cycle time of 40 - 60 minutes.
Thinner HVS 100
Typical Properties (Paste)
Form: Thixotropic paste
Viscosity: 5 - 8 Pas
(20 °C, D = 500 sec
-1
)
Solid Content: 20.5 ± 0.75 %
Printing Speed: Up to at least 10 cm/s
Coverage: Approx. 400 cm
2
/ g
(325 mesh screen) (FFT at 0.4 µm)
Shelf life: 6 months from date of shipment
with correct storage (in a dry, cool
(5 - 25 °C) and dark place with
container tightly shut)
Typical Properties (Fired)
1
Fired Film Thickness
2
: 0.1 - 0.5 µm
(FFT)
Line Definition
2
: ≥ 100 µm (width and space)
Resistivity (25 °C)
2
: 140 - 260 mΩ/
□
(DFT
5
@ 10 µm)
The descriptions and engineering data shown here have been compiled by Heraeus using commonly-accepted procedures, in conjunction with modern testing
equipment, and have been compiled as according to the latest factual knowledge in our possession. The information was up-to date on the date this document was
printed (latest versions can always be supplied upon request). Although the data is considered accurate, we cannot guarantee accuracy, the results obtained from its
use, or any patent infringement resulting from its use (unless this is contractually and explicitly agreed in writing, in advance). The data is supplied on the condition
that the user shall conduct tests to determine materials suitability for a particular application.
Heraeus Deutschland
GmbH & Co. KG
Heraeus Performance Products
BL Precious Colours
Heraeusstr. 12 – 14
63450 Hanau, Germany
E-Mail: preciouscolours@heraeus.com
121213 / BR Page 2 / 2
Resinates .
RP AU 060209-20% H
Gold Resinate Paste
/ DPIS*
* Development Product Information Sheet
1 Typical properties based on laboratory test methods. For optimum
results all materials should be fired in a profiled furnace supplied
with dried, hydrocarbon and other contaminant-free air (PP-1).
2 Measured on alumina 96% after printing with a 325 mesh steel
screen; thickness of screen and emulsion combined was c. 15 µm,
and the resultant printed track was 500 µm wide.
3 REACH compliant according to the latest ** Annex XIV to Regulation
(EC) of the European Parliament and of the council on the
Registration, Evaluation, Authorisation and Restriction of Chemicals
(“REACH”) by European Chemicals Agency and its subsequent
amendments: the material does not contain any substance listed in
Annex XIV.
4 RoHS compliant according to the latest ** Directives (European
Union) of Restriction of Hazardous Substances (���RoHS”) and its
subsequent amendments (including the exceptions related to Pb)
3 Inductively coupled plasma optical emission spectrometry (ICP-ES),
also referred to as Inductively coupled plasma atomic emission
spectroscopy (ICP-AES), is an analytical technique used for the
detection of trace metals.
5 DFT: Dried Film Thickness; FFT: Fired Film Thickness
** See the data sheet issue date (DD/MM/YY) as reference of validity
of latest edition which is available on request.