• Up to seven high efficiency buck converters
• Four linear regulators with load switch options
• RTC supply and coin cell charger
• Watchdog monitoring
• Independent OV/UV monitoring circuits
• One-time programmable device configuration
• 3.4 MHz I
2
C communication interface
• 56-pin 8 x 8 QFN package
• Safety mechanisms to fit ASIL B applications
• Automotive infotainment
• High-end consumer and industrial
Table 1. Ordering Information
Name Version
MC33PF8200DBES WF-Type HVQFN56 SOT684-21 (DD/SC)
[1] To order parts in tape and reel, add the R2 suffix to the part number.
The PF8200 is a power management integrated circuit (PMIC) designed for high performance
i.MX 8 and S32V based applications. It features seven high efficiency buck converters and four
linear regulators for powering the processor, memory and miscellaneous peripherals. It meets
the stringent requirements of automotive applications and is fully AEC-Q100 grade 2 qualified.
Built-in one time programmable memory stores key startup configurations, drastically reducing
external components typically used to set output voltage and sequence of external regulators.
Regulator parameters are adjustable through high-speed I
2
C after start up offering flexibility for
different system states.
Note: Electrical characteristics are mantained in the PF8100_PF8200 data sheet
• AEC-Q100 grade 2 qualified
HVQFN56, plastic, thermally enhanced very thin quad; flat
non-leaded package, wettable flanks; 56 terminals; 0.5
mm pitch; 8 mm x 8 mm x 0.85 mm body
Configuration report for PF8200 OTP program ID: DB
Rev. 1.1 — 26 February 2019