www.panduit.com
PanView iQ
™
Interconnect Fiber
Patch Cords – Plenum (OFNP)
SPECIFICATION SHEET
specifications
Interconnect fiber patch cords shall include a PanView iQ
™
LC
Connector on one end, which shall include a copper conductor
on top of the plug, which shall mate with a PanView iQ
™
patch
panel. The other end of the Interconnect fiber patch cord shall
include a standard, duplex LC connector, which shall be
compatible with LC based transceiver interfaces in equipment
such as switches and routers. The fiber patch cords shall be
available in singlemode and multimode configuration. Fiber
interconnect cords shall enable intelligent physical infrastructure
management for interconnect architecture by verifying switch port
connection and communicating with the system software to allow
improved network visibility.
100% performance
Assurance that each patch cord will deliver the critical optical
tested
performance requirements
Documented metrics
Insertion loss data recorded for every patch cord
Lifetime traceability
Test data is traceable to a QC number on each patch cord
Metallic
Provides continuity through the connector enabling the PanView iQ
™
continuity element
System to robustly monitor patch cord connectivity
Plenum Rated Jacket
Meets NFPA 262 (OFNP) flame ratings for standard compliant safety
Singlemode endface
Every singlemode end face is inspected to be in 100% compliance
with geometry as defined in Telcordia GR-326-CORE, Issue 3. UPC
polishing delivers return loss of 55dB minimum
Certified 10 GbE
10Gig patch cords and pigtails are tested per IEEE 802.3ae 10 GbE
performance
to support network transmission speeds up to 10 Gb/s for link
lengths up to 300m for OM3 and up to 550 meters for OM4 at 850nm
to assure high performance and reliability
Variety of length
Meets individual length requirements for greater system flexibility
Standard
All connectors exceed TIA/EIA-455-21A: 500 mating cycles
requirements:
Compliant with: TIA/EIA-568-C.3 and ISO/IEC 11801
IEC-61754-20 (International Interface Standard)
TIA-604-10 (FOCIS-10)
NFPA 262 (OFNP) flame ratings
Insertion loss:
Per connection: 0.10dB typical, 0.25dB max. (OM3, OM4)
0.35dB max. (LC singlemode)
Return loss:
26dB min. (10Gig multimode)
55dB min. (singlemode)
Intermateability
Meet all individual type requirements
requirements:
Packaging:
Supplied one per bag, carton of 10
key features and benefits
technical information
applications
Panduit’s PanView iQ
™
System Hardware, which
includes intelligent patch panels, modules and
cabling, seamlessly feeds information directly into
the Physical Infrastructure Manager (PIM
™
)
Software Platform to provide continuous real-time
patch field monitoring and visibility of physical
infrastructure connectivity, for enhanced system
reliability and security, and capacity management.
PViQ
™
Patch Panels support tiered installations to
provide customers with the flexibility of installing
passive connectivity that may be upgraded to
fully managed at a future time. PanView iQ
™
Interconnect Fiber Patch Cords enable intelligent
physical infrastructure management for
interconnect architectures by communicating
with the system software, to allow improved
network visibility. Interconnect fiber patch cords
can reduce patch panel requirements by 50% over
cross-connect designs, reducing installation and
deployment costs.
PanView iQ
™
System
PanView iQ
™
Fiber Patch Cords
Singlemode
LC-PViQ
LC OFNP:
PVQ9PE10LQM##.#
OM3 Multimode
LC-PViQ LC,
OFNP:
PVQXPE10LQM##.#
OM4 Multimode
LC-PViQ LC,
OFNP:
PVQZPE10LQM##.#
PanView IQ
™
Fiber Trays
Modular, intelligent,
blank 24-port
no adapters:
PVQ-FMT
OM3
multimode MTP:
PVQ-FMTMTP-ZX
OM4
multimode MTP:
PVQ-FMTMTP-ZZ
singlemode MTP:
PVQ-FMTMTP-9
PanView iQ
™
Intelligence Modules
Panel manager
(PM):
PVQ-PM
Expansion module
(EM):
PVQ-EM
NOTE: PM requires PanView iQ
™
Power Supply (not included).
PanView iQ
™
Power Supply
12 volt power supply
(North America):
PVQ-PS12VDC-S
(Europe):
PVQ-PS12VDC-E
(UK):
PVQ-PS12VDC-U
(Japan):
PVQ-PS12VDC-J
(China):
PVQ-PS12VDC-C
PIM
™
Software Platform and Modules
Base
functionality
module:
PIM-BASE
Connectivity
management
module:
PIM-CONNECT*
Maintenance
support, and
warranty
agreement:
PIM-CAMA
Software and
documentation:
PIM-MEDIA
##.# — Available in ½ meter length increments
from 00.5m to 10.0m
*To order this module, add the appropriate letter to
the end of the part number, based on the size of
the installation: -S (<50 racks); -M (50-199 racks);
-L (200-399 racks); -X (400+ racks). For example,
the part number for the Connectivity Management
Module for 250 racks is PIM-CONNECT-L.
©2012 Panduit Corp.
ALL RIGHTS RESERVED.
PVSP64--WW-ENG
5/2012
PanView iQ
™
Interconnect Fiber Patch Cords – Plenum (OFNP)
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
PANDUIT CANADA
Markham, Ontario
cs-cdn@panduit.com
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
cs-emea@panduit.com
Phone: 44.20.8601.7200
PANDUIT JAPAN
Tokyo, Japan
cs-japan@panduit.com
Phone: 81.3.6863.6000
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
cs-ap@panduit.com
Phone: 65.6305.7575
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
cs-aus@panduit.com
Phone: 61.3.9794.9020
PANDUIT LATIN AMERICA
Guadalajara, Mexico
cs-la@panduit.com
Phone: 52.33.3777.6000
Contact Customer Service by email: cs@panduit.com
or by phone: 800.777.3300 and reference PVSP64--WW-ENG
Visit us at www.panduit.com
For more information
Cable Print Legend
Cable Print Legend
PViQ
™
Connector Assembly
Example Description: PVQ9PE10LQM05.0 = PanView
™
Interconnect Fiber Patch Cord, 9/125µm singlemode,
OFNP 1.6mm jacketed, standard duplex LC – to – PanView
™
Duplex LC, 5.0 meters long
1, 2, and 3 – Product Family
PVQ – PanView iQ
™
Interconnect Cords
(Std. Duplex LC – to – PanView LC)
4 – Fiber Type
9 – OS1/OS2 9/125µm singlemode
X – OM3 10Gig 50/125µm
Z – OM4 10Gig 50/125µm
5 – Jacket Rating
P - Plenum (OFNP)
6 – Jacket Diameter
E – 1.6mm Duplex Zip Cord Cable
7 and 8 – Connector A
10 – Standard LC duplex fiber connector
9 and 10 – Connector B
LQ – PanView
™
LC Duplex Fiber Connector
11 – Length Unit of Measure
M – Meters
12, 13, 14 and 15 – Length in Meters
Available: 00.5 – 10.0 in ½ meter increments
P V Q 9 P E 1 0 L Q M 0 5 . 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Cable twist ties Cable twist ties
Standard Duplex
LC Connectors
Standard cable label includes:
Part number and serial number
Equipment and patch panel labels