Rev.03.13.18_#1.0
iMP Series Software
Page 1
Technical Reference Note
Content
• Software Installation
• Getting Started
• Monitoring Panel
• Configuration Panel
• Software Panel Menu Function
• PMBus
TM
Command List
Product Descriptions
iMP GUI Software is designed to make PSU (iMP Power Supply Unit) accessible
to the user. It is intended to provide information gathered from the PSU and
interactive controls to the basic capabilities of iMP Power supply. The iMP
Software must be installed to PC before the user can make use all of the
function of this program. Please refer to the system requirement before starting
the installation.
Product Descriptions
iMP GUI Software is designed to make PSU (iMP Power Supply Unit) accessible
to the user. It is intended to provide information gathered from the PSU and
interactive controls to the basic capabilities of iMP Power supply. The iMP
Software must be installed to PC before the user can make use all of the
function of this program. Please refer to the system requirement before starting
the installation.
iMP Series
Up to1500 Watts
Intelligent MP series
Total Power: Up to 1500 Watts
Input Voltage: 85-264 Vac
120-300 Vdc
# of Outputs: Up to 21
Technical Reference Note
Rev.03.13.18_#1.0
iMP Series Software
Page 2
Technical Reference Note
Artesyn Embedded Technologies
Software Installation
Note: Make sure that other applications are closed before starting the installation.
1. Download the iMP GUI software from this website link: https://www.artesyn.com/power/impsoftware/
2. To start install program select “install IMP GUI” in the installer menu.
3. After iMP GUI installation completed, install USB-to-I2C driver in the installer menu.