Rev. 061510
GENERAL SPECIFICATIONS
ParametersDescription
Dielectric Strength, Input to Output (50/60Hz) 4000 V
RMS
Maximum Capacitance, Input/Output
10
9
Ohms
Minimum Insulation Resistance (@ 500 VDC)
Ambient Operating Temperature Range
8 pF
Ambient Storage Temperature Range -30 to 125 °C
Weight (typical)
-30 to 80 °C
Encapsulation Thermally Conductive Epoxy
0.85 oz. (25g)
INPUT SPECIFICATIONS
(1)
Description PFE240A25
Control Voltage Range 18-36 VAC
Maximum Turn On Voltage 18.0 Vrms
Minimum Turn-Off Voltage 2.0 Vrms
Typical Input Current @ Nominal Voltage 10 mAdc
Nominal Input Impedance 2.1 k Ohm
Maximum Turn-On Time [msec] (5) 10
Maximum Turn-Off Time [msec] 40
PF240A25
90-140 VDC
90.0 Vrms
10.0 Vrms
10 mAdc
14.1 k Ohm
10
40
PFExxxD25
15-32 VDC
15.0 VDC
1.0 VDC
15 mAdc
1500 Ohm
PF380D/480D
4-15 VDC
4.0 VDC
1.0 VDC
15 mAdc
240 Ohm
1/2 Cycle
1/2 Cycle
1/2 Cycle
1/2 Cycle
PF240D25
3-15 VDC
3.0 VDC
1.0 VDC
15 mAdc
300 Ohm
1/2 Cycle
1/2 Cycle
DataSheet
PCB Mount
Do not forget to visit us at:
www.crydom.com
Copyright © 2017 Crydom Inc. Specifications subject to change without notice.
GENERAL NOTES
MECHANICAL SPECIFICATIONS
THERMAL DERATE INFORMATION
(1) All parameters at 25°C unless otherwise specified.
(2) Off-State dv/dt test method per EIA/NARM standard RS-443,13.11.1
(3) Heatsink temperature 85 ûC Maximum.
(4) Turn-On Time for Random Turn-On versions 0.1 msec (DC Control Models)
DC CONTROL.
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: +DC CONTROL PIN 4: -DC CONTROL
AC CONTROL.
PIN 1: AC LOAD
PIN 2: AC LOAD
PIN 3: AC CONTROL
PIN 4: AC CONTROL
UL E116950
VDE 70938(DC Control Only)
AGENCY APPROVALS
Approvals
HEATSINK TEMPERATURE (ºC)
Fig.2 Forced Air Cooling
0
2
4
8
6
10
0 10 20 30 40 50 60 70 80
Load Current (Amps)
AMBIENT TEMPERATURE (ºC)
Fig.1 Convection Cooling
Load Current (Amps)
0
5
10
20
15
25
0 20 40 60 80 100 120 140