LMR

Flexible Communications Coax

Times LMR cables are high performance broadband,

flexible, low loss 50 Ohm coaxial communication

cables designed for use in wireless applications

such as:

• Private land mobile/2-way land mobile

• WiFi

• Cellular

• Satellite

• GPS

• RFID

• In-Building Communications

• M 2 M Networks

• Positive Train Control (PTC)

• Distributed Antenna Systems (DAS)

• Public Safety Networks

• SCADA/Telemetry

• Lo RA

Times LMR cables can be used virtually anywhere

high performance coaxial cables are used, including:

• Internal component and equipment wiring

• Inter/intra cabinet jumpers

• Base station and antenna jumpers

• Tower and pole feeder runs

• In-building runs, including riser runs and

air-handling plenums

• Rooftop installations

• Oil & Gas Fields

• Power Plants

A full range of LMR cables are available

from LMR-100 (0.100") all the way up to LMR-1700-

DB (1 1/4").

To see the complete line of LMR

cables please

visit our website at www.timesmicrowave.com

In this catalog the focus is on standard LMR cables -

specifically LMR-195, 240, 400 and 600 but there are

many different types of LMR cables which are avail-

able, so you can always be certain that there is an

LMR cable just right for your particular application.

Besides standard LMR cable, Times offers:

• LMR-FR: Fire retardant cable for installation in

building vertical risers or where fire retardancy is

critical, both UL and CSA listed (CMR/CATVR).

• LMR-LLPL: cables are the most rugged and

easiest to install plenum rated cables available,

especially for difficult installs in older buildings.

Cables are both UL and CSA listed (CMP/CATVP).

• LMR-DB: Watertight cables with an inert flooding

compound injected in the braid to completely

eliminate the possibility of any water migration

with a 10 year warranty! The DB feature is optional

on sizes 600 and smaller, and standard on sizes 900

and larger.

• LMR Ultraflex: Stranded center conductor and

thermoplastic rubber jacket for maximum flexibility.

• LMR-75: These are 75 Ohm versions of the

standard LMR cable for unsurpassed performance in

broadband video and specialized RF applications.

Note:

For applications requiring low Passive Intermodula-

tion (PIM), we recommend using one of our many

low PIM cable constructions. See TFT

, SPP

, SPF

SPO

, LMR-SW

and TCOM

. The standard LMR

construction is not suitable for low PIM applications.

Times Microwave Systems also offers a wide range

of Times-Protect

RF Lightning Protection products.

For information please refer to our website at

www.timesmicrowave.com.

www.timesmicrowave.com

LMR mini brochure-3_Layout 1 5/1/2017 2:59 PM Page 2